2006-417-2of2 - Laserfiche WebLink

Home Browse Search

G . Application of Fertilizer: Before applying fertilizer, the soil pH shall be brought to a range of 6 . 0 - 7 . 0 . Contractor shall apply two (2 ) applications . The initial shall be fertilizer and the second application shall be "weed and feed " . The fertilizer shall be spread uniformly over the sodded area at the rate of 436 pounds per acre , or 10 pounds per 1 ,000 square feet, by a spreading device capable of uniformly distributing the material at the specified rate . Contractor shall apply applications as per manufacturer's specification . All tickets from bags shall be handed over to the County Inspector. On steep slopes, where the use of a machine for spreading or mixing is not practicable , the fertilizer shall be spread by hand and raked in and thoroughly mixed with the soil to a depth of approximately 2 inches . H . Placing Sod : The sod shall be placed on the prepared surface , with edges in close contact and shall be firmly and smoothly embedded by light tamping with appropriate tools . Where sodding is used in drainage ditches , the setting of the pieces shall be staggered so as to avoid a continuous seam along the line of flow. Along the edges of such staggered areas , the offsets of individual strips shall not exceed 6 inches . In order to prevent erosion caused by vertical edges at the outer limits , the outer pieces of sod shall be tamped so as to produce a featheredge effect . Where sodding is placed abutting paved shoulder, the contractor is to ensure that the finished sod elevation is 1 '/z" below paved shoulder. On slopes greater than 3: 1 , the Contractor shall prevent the sod from sliding by means of wooden pegs driven through the sod blocks into firm earth , at suitable intervals . Sodding shall not be performed when weather and soil conditions are , in the Engineer's opinion , unsuitable for proper results . Sod shall be placed around all structures , equipment pads , etc. I . Watering : The areas on which the sod is to be placed shall contain sufficient moisture , as determined by the Engineer, for optimum results . After being placed , the sod shall be kept in a moist condition to the full depth of the rooting zone for at least 2 weeks . Thereafter, the Contractor shall apply water as needed until the sod roots and starts to grow for a minimum of 60 days (or until final acceptance , whichever is latest) . J . Maintenance : The Contractor shall , at his expense, maintain the sodded areas in a satisfactory condition until final acceptance of the project. Such maintenance shall include repairing of any damaged areas and replacing areas in which the establishment of the grass stand does not appear to be developing satisfactorily. Replanting or repair necessary due to the Contractor's negligence , carelessness or failure to provide routine maintenance shall be at the Contractor' s expense . GENERAL PROVISIONS TP- 13 C:\Documents and Settings\teresaa\Loral Settings\Temporary Internet Files\0LKF3\DIVISI0N 2 - Technical Provisions (Oslo Road Phase I ).doc