2003-270 - Laserfiche WebLink

Home Browse Search

to any work done because of this type revision that is not in accordance to the Contract Documents as may be required by the ENGINEER . F. Partial submittals may not be reviewed . The ENGINEER will be the only judge as to the completeness of a submittal . Submittals not complete will be returned to the CONTRACTOR , and will be considered " Not Approved" until resubmitted . The ENGINEER may at his/her option provide a list or mark the submittal directing the CONTRACTOR to the areas that are incomplete . G . Repetitive Review 1 . Shop drawings and other submittals will be reviewed no more than twice at the OWNER's expense . All subsequent reviews will be performed at times convenient to the ENGINEER and at the CONTRACTOR 's expense , based on the ENGINEER 's then prevailing rates . The CONTRACTOR shall reimburse the OWNER for all such fees invoiced to the OWNER by the ENGINEER . Submittals are required until approved . 2 . Any need for more than one resubmission , or any other delay in obtaining ENGINEER 's review of submittals , will not entitle CONTRACTOR to extension of the Contract Time . H . If the CONTRACTOR considers any correction indicated on the shop drawings to constitute a change to the Contract Documents , the CONTRACTOR shall give written notice thereof to the ENGINEER at least seven working days prior to release for manufacture . I . When the shop drawings have been completed to the satisfaction of the ENGINEER , the CONTRACTOR shall carry out the construction in accordance therewith and shall make no further changes therein except upon written instructions from the ENGINEER . 1 . 06 DISTRIBUTION A . Distribute reproductions of approved shop drawings and copies of approved product data and samples , where required , to the job site file and elsewhere as directed by the ENGINEER . Number of copies shall be as required by the ENGINEER but shall not exceed 6 . Page 23 of 55