2004-188 - Laserfiche WebLink

Home Browse Search

E . Resubmittals will be handled in the same manner as first submittals . On resubmittals the CONTRACTOR shall direct specific attention, in writing on the letter of transmittal and on resubmitted shop drawings by use of revision triangles or other similar methods , to revisions other than the corrections requested by the ENGINEER, on previous submissions . Any such revisions that are not clearly identified shall be made at the risk of the CONTRACTOR. The CONTRACTOR shall make corrections to any work done because of this type revision that is not in accordance to the Contract Documents as may be required by the ENGINEER. F . Partial submittals may not be reviewed . The ENGINEER will be the only judge as to the completeness of a submittal . Submittals not complete will be returned to the CONTRACTOR, and will be considered "Not Approved" until resubmitted . The ENGINEER may at his/her option provide a list or mark the submittal directing the CONTRACTOR to the areas that are incomplete . G . Repetitive Review 1 . Shop drawings and other submittals will be reviewed no more than twice at the OWNER's expense . All subsequent reviews will be performed at times convenient to the ENGINEER and at the CONTRACTOR' s expense, based on the ENGINEER's then prevailing rates . The CONTRACTOR shall reimburse the OWNER for all such fees invoiced to the OWNER by the ENGINEER. Submittals are required until approved. 2 . Any need for more than one resubmission, or any other delay in obtaining ENGINEER' s review of submittals , will not entitle CONTRACTOR to extension of the Contract Time . H . If the CONTRACTOR considers any correction indicated on the shop drawings to constitute a change to the Contract Documents , the CONTRACTOR shall give written notice thereof to the ENGINEER at least seven working days prior to release for manufacture . I. When the shop drawings have been completed to the satisfaction of the ENGINEER, the CONTRACTOR shall carry out the construction in accordance therewith and shall make no further changes therein except upon written instructions from the ENGINEER. 1 . 06 DISTRIBUTION A . Distribute reproductions of approved shop drawings and copies of approved product data and samples, where required, to the job site file and elsewhere as directed by the ENGINEER. Number of copies shall be as required by the ENGINEER but shall not exceed 6 . 1 . 07 CONSTRUCTION PHOTOGRAPHS A . The CONTRACTOR shall have met the provisions of Division 1 . B . The film negatives shall be retained in the files of the CONTRACTOR until the completion of the project and shall then be turned over to the OWNER . 6706-38666\2/ 5 /04 Page 23 of 59 VRB