South Gifford Road Landfill
<br /> Indian River County
<br /> Monitoring_Site_Num Testsite designation relevant to the sample ( MW- 1 , SW- 1 , Leach to sump ,
<br /> etc) . Use " DUP" after the well name when field duplicate samplec. are
<br /> collected , e . g . MW-2DUP . Identify all Equipment , Field and Trip Blanks in this
<br /> field using the complete word " BLANK" in your description . Information may be
<br /> obtained from the Monitoring Plan issued by the Department to the facilities .
<br /> WACS_Report_Type Used to identify type of report ( Semiannual GW, Annual Leachate , etc) , see
<br /> code table . Information may be obtained from Monitoring Plan iscued by the
<br /> Department to the facilities .
<br /> Ground_Water_Class Used to identify GW or SW classes ( G -11 , G- III , SW- I1 ; , SW- 111F , W- IIIM , SW-
<br /> IV , LC , etc) , see code table . Information may be obtained from Monitoring Plan
<br /> issued by the Department to the facilities .
<br /> Well_Type Used to identify type of well ( Background , Compliance , Detection , etc) , see
<br /> code table . Information may be obtained from Monitoring Plan issued by the
<br /> Department to the facilities .
<br /> Well_Purge_Flag Used to confirm well purging prior to sampling (Y or N ) ( may be bl nk for SW,
<br /> leachate) .
<br /> Samp_Method Method used to collect the sample ( grab , bailer, peristaltic pump , tc) , see
<br /> code table .
<br /> Date_Sampled Date sample was collected . Make sure analysis dates for field parameters , e . g .
<br /> pH , dissolved oxygen , temperature , conductivity , turbidity and wa er elevation
<br /> are the same as sampling date .
<br /> DOHE DOH certification number for laboratory . For field parameters , e . g pH ,
<br /> dissolved oxygen , temperature , conductivity , turbidity and water a evation ,
<br /> DONE is " DEP-SOP " in place of using the NELAC certification number.
<br /> Sam le ld Assigned by lab to each sample for QC purposes ,
<br /> Matrix Type of matrix W= water/liquid , S = soil/sediment/solid waste) .
<br /> Filtered Used to identify filtered samples Y or N ) ,
<br /> Date Prepared Date sample was prepared for analysis , if required (may be blank , .
<br /> Preservation Method used to preserve sample cool to 4oC ; H <2 , etc) (may b blank) .
<br /> Preservation Intact Indicates condition received at lab Y or N ) ,
<br /> Date Analyzed Date lab analysis was conducted for sample .
<br /> Ana Method EPA method used to analyze sample EPA 8260) ,
<br /> Storet_Code Appropriate STORET parameter code , ( 039430 for Isodrin ) . See STORET
<br /> Code table .
<br /> Parameter Name of compound analyzed ( Benzene , Arsenic , etc) or measured in field ( pH ,
<br /> DO , etc) .
<br /> Result Numeric results of analysis , do not include non -numeric characters such as <
<br /> or > . Only numeric numbers are allowed in the result and detection limit
<br /> columns . Use the qualifier column to specify results and detection limits .
<br /> Units Units corresponding to analytical results ( mg/l , ug/l , etc) . Use either " U " or " u "
<br /> for microgram . Appropriate for the STORET Code used , see STO RET Code
<br /> table .
<br /> Detection_Limit MDL ( not PQL ) for analytical method , ( may be blank for field parameters) .
<br /> Only numeric numbers are allowed in the result and detection limi columns .
<br /> Use the qualifier column to specify results and detection limits .
<br /> Qualifier Appropriate data qualifiers as listed in 62- 160 , FAC ( may be blank', , see code
<br /> table .
<br /> Comment Any additional comments on the sample ( may be blank) .
<br /> CAS -Number Chemical Abstract Service Registry Number (may be blank) , optional .
<br /> Notes :
<br /> • All dates are reported in the following format where HH is the hours on the 24 hour clock .
<br /> MM/ DD/YYYY HH : MM : SS
<br /> . 5 -
<br /> 01 /06/05
<br />
|