2008-009 (2) - Laserfiche WebLink

Home Browse Search

• removal , relocation , or replacement in the A. In emergencies affecting the safety or protec- course of construction. tion of persons or the Work or property at the Site or adjacent thereto, CONTRACTOR is obligated to act to B . CONTRACTOR shall comply with all applica- prevent threatened damage, injury, or loss. ble Laws and Regulations relating to the safety of CONTRACTOR shall give ENGINEER prompt written persons or property, or to the protection of persons or notice if CONTRACTOR believes that any significant property from damage, injury, or loss; and shall erect changes in the Work or variations from the Contract „r and maintain all necessary safeguards for such safety Documents have been caused thereby or are and protection . CONTRACTOR shall notify owners of required as a result thereof. If ENGINEER adjacent property and of Underground Facilities and determines that a change in the Contract Documents other utility owners when prosecution of the Work is required because of the action taken by • may affect them , and shall cooperate with them in the CONTRACTOR in response to such an emergency, a protection, removal, relocation , and replacement of Work Change Directive or Change Order will be their property. All damage, injury, or loss to any issued . property referred to in paragraph 6. 13.A.2 or 6. 13.A.3 caused , directly or indirectly, in whole or in part, by 6 . 17 Shop Drawings and Samples CONTRACTOR, any Subcontractor, Supplier, or any other individual or entity directly or indirectly employed A. CONTRACTOR shall submit Shop Drawings • by any of them to perform any of the Work, or anyone to ENGINEER for review and approval in accordance for whose acts any of them may be liable, shall be with the acceptable schedule of Shop Drawings and remedied by CONTRACTOR (except damage or loss Sample submittals. All submittals will be identified as • attributable to the fault of Drawings or Specifications ENGINEER may require and in the number of copies or to the acts or omissions of OWNER or ENGINEER specified in the General Requirements. The data or ENGINEER's Consultant, or anyone employed by shown on the Shop Drawings will be complete with any of them , or anyone for whose acts any of them respect to quantities, dimensions, specified perfor- • may be liable, and not attributable , directly or mance and design criteria , materials , and similar data indirectly, in whole or in part, to the fault or negligence to show ENGINEER the services , materials , and of CONTRACTOR or any Subcontractor, Supplier, or equipment CONTRACTOR proposes to provide and • other individual or entity directly or indirectly employed to enable ENGINEER to review the information for the by any of them). CONTRACTOR's duties and limited purposes required by paragraph 6. 17 . E . responsibilities for safety and for protection of the Work shall continue until such time as all the Work is B . CONTRACTOR shall also submit Samples to • completed and ENGINEER has issued a notice to ENGINEER for review and approval in accordance OWNER and CONTRACTOR in accordance with with the acceptable schedule of Shop Drawings and paragraph 14.07 .6 that the Work is acceptable Sample submittals. Each Sample will be identified • (except as otherwise expressly provided in connection clearly as to material , Supplier, pertinent data such as with Substantial Completion ). catalog numbers, and the use for which intended and otherwise as ENGINEER may require to enable 6 . 14 Safety Representative ENGINEER to review the submittal for the limited Will purposes required by paragraph 6. 17.E. The numbers A. CONTRACTOR shall designate a qualified of each Sample to be submitted will be as specified in and experienced safety representative at the Site the Specifications. • whose duties and responsibilities shall be the prevention of accidents and the maintaining and C. Where a Shop Drawing or Sample is required supervising of safety precautions and programs . by the Contract Documents or the schedule of Shop Drawings and Sample submittals acceptable to ENGI- • 6 . 15 Hazard Communication Programs NEER as required by paragraph 2.07, any related Work performed prior to ENGINEER's review and A. CONTRACTOR shall be responsible for approval of the pertinent submittal will be at the sole coordinating any exchange of material safety data expense and responsibility of CONTRACTOR. sheets or other hazard communication information required to be made available to or exchanged be- D . Submittal Procedures tween or among employers at the Site in accordance • with Laws or Regulations. 1 . Before submitting each Shop Drawing or Sample , CONTRACTOR shall have 6. 16 Emergencies determined and verified : • 00700 - General Conditions REV 04-07 00700 - 24 F:%EngineeringWWilliam WaslerContrac6Master Contract Dowments=700 - General Concams REV 04-07.doc •