Laserfiche WebLink
or <br />771 <br />01340 - Submittal of Shop Drawings.doc <br />Y 1.1 SCOPE <br />A. Submit shop drawings, product data and samples as required by or <br />inferred by the Drawings and Specifications. Submittals shall conform to <br />the requirements of Article 6.17 of the General Conditions, Section 00700, <br />and as described in this Section. <br />1.2 SHOP DRAWINGS <br />r A. Shop drawings are original drawings, prepared by the CONTRACTOR, a <br />subcontractor, supplier, or distributor, which illustrate some portion of the <br />work; showing fabrication, layout, setting, or erection details. Shop <br />.. drawings are further defined in Article 6.17, Section 00700. <br />B. Shop drawings shall be prepared by a qualified detailer and shall be <br />ow identified by reference to sheet and detail numbers on the Contract <br />Drawings. <br />W 1.3 PRODUCT DATA <br />A. Product data are manufacturer's standard schematic drawings and <br />r manufacturer's catalog sheets, brochures, diagrams, schedules, <br />performance charts, illustrations, and other standard descriptive data. <br />Product data are further defined in Article 6.17, Section 00700. <br />r <br />B. Modify standard drawings to delete information which is not applicable to <br />the project and supplement them to provide additional information <br />applicable to the project. <br />C. Clearly mark catalog sheets, brochures, etc., to identify pertinent <br />" materials, products, or models. <br />.r <br />1.4 SAMPLES <br />Samples are physical examples to illustrate materials, equipment, or <br />workmanship and to establish standards by which work is to be evaluated. <br />` Samples are further defined in Article 6.17, Section 00700. <br />M <br />01340 - Submittal of Shop Drawings.doc <br />01340-1 <br />r F.\Engineenng\Capital Projects\9611-CR 512 Widening\9611 CR 512 PHASE IV\Contract Documents\01340 -Submittal of Shop Drawings.doc <br />