Laserfiche WebLink
• <br />01340 - Submittal of Shop Dmwings.doc <br />01340-5 <br />_ F:\EngineerinMCapital Projects\9611-CR 512 Widening\9611 CR 512 PHASE MContract Documents101340 -Submittal of Shop Drawings.doc <br />01340 - Submittal of Shop Drawings.doc <br />E. All submittals shall bear the stamp of approval and signature of <br />CONTRACTOR as evidence that they have been reviewed by <br />CONTRACTOR. Submittals without this stamp of approval will not be <br />reviewed by the ENGINEER and will be returned to CONTRACTOR. <br />F. Assign a number to each submittal starting with No. 1 and thence <br />numbered consecutively. Identify resubmittals by the original submittal <br />number followed by the suffix "A" for the first resubmittal, the suffix "B" for <br />the second resubmittal, etc. <br />G. Initially submit to ENGINEER a minimum of six (6) copies of all submittals <br />that are on 11 -inch by 17 -inch or smaller sheets (no less than 8 1/2 -inch x <br />11 -inch), and one unfolded sepia and 2 prints made from that sepia for all <br />submittals on sheets larger than 11 -inch by 17 -inch. <br />H. After ENGINEER completes his review, Shop Drawings will be marked <br />with one of the following notations: <br />f. <br />1. Approved <br />2. Approved as Corrected <br />3. Approved as Corrected - Resubmit <br />• <br />4. Revise and Resubmit <br />5. Not Approved <br />I. If a submittal is acceptable, it will be marked "Approved" or "Approved as <br />Corrected". Three (3) prints or copies of the submittal will be returned to <br />CONTRACTOR. <br />J. Upon return of a submittal marked "Approved" or "Approved as <br />Corrected", CONTRACTOR may order, ship or fabricate the materials <br />included on the submittal, provided it is in accordance with the corrections <br />r <br />indicated. <br />K. If a Shop Drawing marked "Approved as Corrected" has extensive <br />" <br />corrections or corrections affecting other drawings or Work, ENGINEER <br />may require that CONTRACTOR make the corrections indicated thereon <br />and resubmit the Shop Drawings for record purposes. Such drawings will <br />` <br />have the notation, "Approved as Corrected - Resubmit." <br />L. If a submittal is unacceptable, three (3) copies will be returned to <br />• <br />CONTRACTOR with one of the following notations: <br />1. 'Revise and Resubmit' <br />2. "Not Approved" <br />• <br />01340 - Submittal of Shop Dmwings.doc <br />01340-5 <br />_ F:\EngineerinMCapital Projects\9611-CR 512 Widening\9611 CR 512 PHASE MContract Documents101340 -Submittal of Shop Drawings.doc <br />