Laserfiche WebLink
r <br /> 01340 - Submittal of Shop Drawings . doc <br /> M . Upon return of a submittal marked " Revise and Resubmit" , make the <br /> corrections indicated and repeat the initial approval procedure . The " Not <br /> r Approved" notation is used to indicate material or equipment that is not <br /> acceptable. Upon return of a submittal so marked , repeat the initial <br /> r approval procedure utilizing acceptable_ material or equipment. <br /> N . Any related Work performed or equipment installed without an "Approved" <br /> or "Approved as Corrected" Shop Drawing will be at the sole responsibility <br /> of the CONTRACTOR . <br /> r O . Submit Sop Drawings well in advance of the need for 'the material or <br /> equipment for construction and with ample allowance for the time required <br /> to make delivery of material or equipment after data covering such is <br /> r approved . CONTRACTOR shall assume the risk for all materials or <br /> equipment which is fabricated or delivered prior to the approval of Shop <br /> Drawings . Materials or equipment will not be included in periodic progress <br /> r., payments until approval thereof has been obtained in the specified <br /> manner. <br /> r P . ENGINEER will review and process all submittals promptly, but a <br /> reasonable time should be allowed for this , for the Shop Drawings being <br /> revised and resubmitted , and for time required to return the approved <br /> r Shop Drawings to CONTRACTOR. <br /> Q . Furnish required submittals with complete information and accuracy in <br /> r order to achieve required approval of an item within three submittals . All _ <br /> costs to ENGINEER involved with subsequent submittals of Shop <br /> Drawings , Samples or other items requiring approval , will be back-charged <br /> • to CONTRACTOR in accordance with the General Conditions and the <br /> Supplementary Conditions . If the CONTRACTOR requests a substitution <br /> for a previously approved item , all of ENGINEER'S costs in the reviewing <br /> and approval of the substitution will be back-charged to CONTRACTOR <br /> unless the need for such substitution is beyond the control of <br /> CONTRACTOR. <br /> r <br /> + + END OF SECTION + + <br /> r <br /> a <br /> 01340 - Submittal of Shop Drawings.doc <br /> 01340-6 <br /> FAEngineeringZapitaI Projects19611 -CR 512 Widening19611 CR 512 PHASE MContract Documenti;V340 - Submittal of Shop Drawings.doe <br /> r <br />