|
3 . 12 . 6 By approving and submitting Shop Drawings, Product Data, Samples and similar
<br /> submittals, the Contractor represents that the Contractor has determined and verified
<br /> materials, field measurements and field construction criteria related thereto, or will do so, and
<br /> has checked and coordinated the information contained within such submittals with the
<br /> requirements of the Work and of the Contract Documents.
<br /> 3 . 12 . 7 The Contractor shall perform no portion of the Work for which the Contract
<br /> Documents require submittal and review of Shop Drawings, Product Data, Samples or similar
<br /> submittals until the respective submittal has been approved by the Architect.
<br /> 3 . 12 . 8 The Work shall be in accordance with approved submittals except that the Contractor
<br /> shall not be relieved of responsibility for deviations from requirements of the Contract
<br /> Documents by the Architect's approval of Shop Drawings, Product Data, Samples or similar
<br /> submittals unless the Contractor has specifically informed the Architect in writing of such THIS DOCUMENT HAS IMPORTANT LEGAL
<br /> deviation at the time of submittal and ( i) the Architect has , with prior approval of the Owner CONSEQUENCES. CONSULTATION WITH AN
<br /> given written approval to the specific deviation as a minor change in the Work, or ( 2) a Change ATTORNEY IS ENCOURAGED WITH
<br /> Order or Construction Change Directive has been issued authorizing the deviation. The RESPECT TO ITS COMPLETION
<br />OR
<br /> Contractor shall not be relieved of responsibility for errors or omissions in Shop Drawings, MODIFICATION. AUTHENTICATION OF
<br />THIS
<br /> Product Data, Samples or similar submittals by the Architect's approval thereof. ELECTRONICALLY DRAFTED AIA
<br /> DOCUMENT MAY BE MADE BY U51NG AIA
<br /> 3 . 12 . 9 The Contractor shall direct specific attention, in writing or on resubmitted Shop DOCUMENT D401.
<br /> Drawings, Product Data, Samples or similar submittals, to revisions other than those requested
<br /> by the Architect on previous submittals. In the absence of such written notice the Architect's This document has been approved and
<br /> approval of a resubmission shall not apply to such revisions. endorsed by The Associated General
<br /> Contractors of America.
<br /> 3 . 12 . 10 The Contractor shall not be required to provide professional services which constitute
<br /> the practice of architecture or engineering unless such services are specifically required by the
<br /> Contract Documents for a portion of the Work or unless the Contractor needs to provide such
<br /> services in order to carry out the Contractor' s responsibilities for construction means, methods,
<br /> techniques, sequences and procedures. The Contractor shall not be required to provide
<br /> professional services in violation of applicable law. If professional design services or
<br /> certifications by a design professional related to systems, materials or equipment are specifically
<br /> required of the Contractor by the Contract Documents, the Owner and the Architect will
<br /> specify all performance and design criteria that such services must satisfy. The Contractor shall
<br /> cause such services or certifications to be provided by a properly licensed design professional,
<br /> whose signature and seal shall appear on all drawings, calculations, specifications, certifications,
<br /> Shop Drawings and other submittals prepared by such professional. Shop Drawings and other
<br /> submittals related to the Work designed or certified by such professional, if prepared by others,
<br /> shall bear such professional's written approval when submitted to the Architect. The Owner
<br /> and the Architect shall be entitled to rely upon the adequacy, accuracy and completeness of the
<br /> services, certifications or approvals performed by such design professionals, provided the
<br /> Owner and Architect have specified to the Contractor all performance and design criteria that
<br /> such services must satisfy. Pursuant to this Subparagraph 3. 12. 1o, the Architect will review,
<br /> approve or take other appropriate action on submittals only for the limited purpose of checking
<br /> for conformance with information given and the design concept expressed in the Contract
<br /> Documents. The Contractor shall not be responsible for the adequacy of the performance or
<br /> design criteria required by the Contract Documents.
<br /> 3 . 13 USE OF SITE
<br /> 3 . 13 . 1 The Contractor shall confine operations at the site to areas permitted by law, f . �
<br /> ordinances, permits and the Contract Documents and shall not unreasonably encumber the site
<br /> with materials or equipment.
<br /> 01997 AIA®
<br /> 3 . 14 CUTTING AND PATCHING AIA DOCUMENT A201 - 1997
<br /> GENERAL CONDITIONS OF THE
<br /> Copyright 1911 , 1915, 1918, 19 5, 19371 19511 1958, 1 1 , 1963, 1966, 1967, 1970, 1976, 19878 1997 by
<br /> Then CONTRACT FOR CONSTRUCTION
<br /> American Institute of Architects . Fifteenth Edition . Reproduction of the material herein or substantial
<br /> quotation of its provisions without written permission of the AIA violates the copyright laws of the United The American Institute of
<br />Architects
<br /> States and will subject the violate to legal prosecution . WARNING : Unlicensed photocopying violates U .S . 1735 New York Avenue,
<br /> N .W.
<br /> copyright laws and will subject the violator to legal prosecution . This document was electronically produced Washington, D . C . 20006-5292
<br /> with permission of the AIA and can be reproduced in accordance with your license without violation until
<br /> the date of expiration as noted below . expiration as noted below . expiration as noted below. User
<br /> Document: a201 general conditions irc jail expansion (2004) . aia -- 10/29/2004. AIA License Number 1127252,
<br /> which expires on 12/31/2004.
<br /> 17
<br />
|