Laserfiche WebLink
1.05 <br />1.06 <br />1.07 <br />A. The pump manufacturer will submit data and specifications for the pumping unit and will <br />include but not be limited to the following. <br />1. Name of Manufacturer <br />2. Type and Model <br />3. Design Rotative Speed <br />4. Type of Beatings <br />5. Type of Mechanical Seal <br />6. Impeller Diameter <br />7. Size of Shafting <br />8. Size of Suction Connection <br />9. Size of Discharge Connection <br />10. Weight of Pump <br />11. Pump performance curves showing capacity versus head, NPSHR, pump <br />efficiency, and pump BHP plotted to scales consistent with performance <br />requirements. <br />B. Provide submittals in accordance with Section 01340. <br />C. Provide O & M manuals in accordance with Section 01730. <br />D. Provide manufacturer's certification of correct installation after manufacturer's inspection <br />and start up. <br />REFERENCES & STANDARDS <br />A. The pumps shall be manufactured and tested in accordance with the most current Hydraulic <br />Institute standards, ANSUHI 1.1-1.5 and ANSUHI 1.6-1994, <br />B. Electric motors shall conform to the latest standards of IEEE, ANSI, and NEMA except as <br />otherwise specified herein. <br />The 1 1111 • unit and all related appurtenances shall be delivered and ready for 11 t'. 11t <br />within 840 weeks fi-om shop drawing approval, <br />044572017 <br />11934-3 <br />