Laserfiche WebLink
SECTION 15100 <br />PIPING AND VALVES <br />PART 1 - GENERAL <br />1.01 WORK INCLUDED <br />A. Furnish and install all piping, fittings, and valves as shown on the drawings and specified <br />herein. In general, include all piping from tie-ins to and from equipment as shown on the <br />drawings, including all piping appurtenances for a complete, operating piping system as <br />specified herein. <br />1.02 RELATED REQUIREMENTS SPECIFIED ELSEWHERE <br />A. Section 02670 — Flushing, Testing and Disinfection <br />B. Section 09900 — Painting <br />1.03 REFERENCES <br />A. AASHTO T180 - Moisture -Density Relations of Soils Using a 104b Rammer and an 18 -in. <br />Drop, <br />Be ANSUASTM D2466 - Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40. <br />C. ANSIIAWWA C104 — Standard for Cement -Mortar Lining for Ductile -Iron Pipe and Fittings <br />for Water. <br />D. ANSI/AWWA C105 — Standard for Polyethylene Encasement for Ductile -Iron Pipe Systems <br />E. ANSI/AWWA C110 — Standard for Ductile -Iron and Gray -Iron Fittings, 3 In. Through 48 In. <br />for Water and Other Liquids. <br />F. ANSI/AWWA C1 I — Standard for Rubber -Gasket Joints for Ductile -Iron Pressure Pipe and <br />Fittings. <br />G. ANSIIAWWA C115 — Standard for Flanged Ductile -Iron Pipe with Ductile -Iron or Gray Iron <br />Treaded Flanges, <br />H. ANSI/AWWA C150 — Standard for the Thickness Design of Ductile -Iron Pipe, <br />I. ANSIIAWWA CISI — Standard for Ductile -Iron Pipe, Centrifugally Cast, for Water or Other <br />Liquids, <br />J. ANSI/AWWA C153 — Standard for Ductile -Iron Compact Fittings, 3 In, Through 24 In. and <br />54 In. Through 64 In. for Water Service. <br />K. AWWA C210 — Standard for Liquid -Epoxy Coating Systems for the Interior and Exterior of <br />Steel Water Pipelines, <br />044572017 <br />15100-1 <br />