Laserfiche WebLink
r Geosyntec Consultants <br /> • Comply with the financial assurance requirements for closure and long term post- <br /> closure care (typically for five years); and <br /> • Inspect incoming C&D debris loads to identify and exclude prohibited items from <br /> being disposed into the facility. <br /> Some types of C&D debris are considered clean debris and are not regulated under Chapter 62- <br /> 701 , FAC. <br /> r <br /> 3.2 Typical C&D Debris Management in Florida <br /> C&D debris is most commonly managed via one of two mechanisms. The first is disposal in a <br /> landfill . Several different types of landfills may be permitted to operate in Florida. C&D <br /> debris generators and waste haulers have the option of disposing of C&D debris in : (i) lined <br /> Class I landfills (those typically used for household and commercial MSW) ; (ii) lined or <br /> unlined Class III landfills (typically used for C&D debris and yard trash); and/or unlined C&D <br /> debris disposal facilities . The FDEP is currently proposing changes to the solid waste <br /> regulations (Chapter 62-701 , FAC) which will include the requirement for all Class III landfills <br /> to be lined. Also, the current and proposed regulations require the owner or operator of a <br /> proposed C&D disposal facility to demonstrate the need not to line the facility during the <br /> _ permitting process. <br /> A second option for management of C&D debris is processing at a materials recovery facility <br /> (MRF) . A number of MRFs in Florida are permitted to accept C&D debris, process it to <br /> recover saleable commodities or recyclable components, and then haul the non-recoverable <br /> material for disposal in an appropriate landfill . The layout of these facilities varies depending <br /> on operator, location, and objectives of the facility. Typical operations include separation of <br /> large or easily recoverable items up front, screening to remove soil, and separation using a <br /> i combination of manual labor and mechanical equipment. The major commodities recovered <br /> include wood, concrete, metal, aluminum cans, paper, cardboard , and soil . <br /> r 3.3 C&D Debris Management in Indian River County <br /> The SWDD Board approach to the management of C&D debris is to encourage recovery, <br /> +� recycling and reuse in order to minimize the quantities of material requiring landfill disposal . <br /> Mixed C&D debris loads delivered for landfill disposal are charged a disposal fee of $31 . 80 per <br /> ton by the SWDD. Generators of C&D debris can reduce their cost by separating recyclables <br /> ` such as scrap metal and cardboard from mixed loads and delivering them to the designated <br /> recycling area at the County landfill site, free of charge. In addition, generators can also <br /> deliver clean concrete and/ or clean soil to the landfill site at a reduced fee of $ 3 . 00 per ton. <br /> FL0996-03"JL70184 08-10-2007.doc.doc 3-2 2007-08- 10 <br /> r — <br /> r <br />