2007-263E - Laserfiche WebLink

Home Browse Search

Indian River County Administration Complex Bldg. 2 - 1st Floor Punch List - Friday - 06/29/07 July 09, 2007 Page 6 Office 201 (continued) 6. To the left of hollow metal door frame 205B at the latching device height drywall is irregular, needs to be sanded and repainted. 7 . Hollow metal frame at the head stops for the pocket door needs to be caulked and repainted . Also, the head track for the pocket door is unacceptable, screws do not engage for the stops into anything and the exposed wood can be seen. 8. Drywall to the left of Door 205B and to the right of Data outlet 31/32 just above the vinyl base to the left and the right of the data outlet needs to be sanded and repainted. 9. Drywall around quad outlet to the left of the data outlet needs to be sanded and repainted. Drywall irregular. 10. Desk set in place in this room, unable to physical see condition of the wall at borrowed light 204 BLl . 11 . Drywall above light 204 BLl needs to be sanded and repainted at the hollow metal window frame . 12. Ceiling grid in front of Door 204A is chipped, that is the 2°d one off the exterior wall and the ls` the above the left side of the door. 13 . Ceiling grid the 1st ceiling grid off the south wall and 4`' full tile off the west wall, finish on the tile is damaged. 14. Ceiling tile ls` full tile off the east wall, 2"d full ceiling tile off the north wall tile is chipped. Work Room 203 1 . This room is full of chairs from wall to wall. This room can not be completely punched out due to the chairs . Unable to access the borrowed light 203 BL from inside of Work Room 203 , needs to he punched out at a later date. 2. Door 203 - Hollow metal frame needs to be touched-up with paint inside and out. 3 . Inside top right corner of the door frame is bent. 4. Door 203A is a Dutch door, inside face of Dutch door shelf needs to be finished, unfinished at this time . 5 . Inside face of Door 203A, chips in the finish, top right at the dead bolt and lockset, etc. 6. Vinyl base to the left of Door 203 needs to be re-adhered. 7 . Left of Door 203A drywall needs to be repainted from the vinyl base up, insufficient coats of paint. 8 . Light switch covers and light finish device needs to be cleaned of paint. 9. Ceiling grid above 203A full of drywall mud and paint, this needs to be cleaned. Office 205 1 . Desk has been set in place in this room. 2. View light in pocket door 205B has not been installed. 3 . Door 205A - Metal view light frame needs to be repainted, paint is chipping especially no paint on the screw head. 4. Outside face of door bottom edge needs to be cleaned of paint and finish has been chipped. 5 . Borrowed light 205 BL2 hollow metal frame needs to be touched-up with paint to the left jamb and top head and also drywall where it abuts the head of the frame needs to be sanded and repainted. 6. Hollow metal door frame 205A bottom right of the door is dented. 7. Vinyl base to the left of 205A needs to be cleaned and also inside comer needs to be repainted. 8. To the left of Door 205A drywall around electrical outlet needs to be repainted. 9. Left side of hollow metal door frame from the vinyl base up to the strike needs to be repainted and re-caulked. 10. Borrowed light 205 BL1 that is the narrow view light in the east wall of Office 205 , frame needs to be repainted completely. 11 . Two ceiling tiles misplaced at this time. 12 . Ceiling tile between boxed out column and A/C diffusers tile is chipped. D O N A D I O & Associates, Architects, P.A.