2007-263D - Laserfiche WebLink

Home Browse Search

IRC Administration Complex Property Appraisers Office - Punch List - Friday - 07/06/07 July 10, 2007 Page 16 Office 638 1 . This office is completely filled with parts for System Furniture. 2. Hollow metal door frame needs to be touched-up with paint on the outside and inside. 3 . Drywall to the right of the door frame, at the light switch, needs to be sanded and repainted. 4. Back wall which is the north wall, drywall around electrical outlet needs to be sanded and repainted. 5 . West wall south electrical outlet drywall needs to be sanded and repainted around the electrical outlet. 6. Drywall between the south electrical outlet and the data outlet on the west wall drywall above the vinyl base needs to be patched and repaired where there is a dent in the finish. 7. Far left comer at the south corner of the west wall needs to be sanded and repainted. Also, in this general area drywall needs to be touched-up with paint. 8. Ceiling tile damaged in front of the A/C grille. Corridor 624 1 . West end of south wall just to the west of opening leading into Work Area 261 drywall finish around electrical outlet needs to be repainted. 2. Drywall needs to be cleaned of drywall dust and touched-up with paint from the opening leading into 621 and the east outside comer of Office Area 621 . 3 . Drywall above vinyl base between Door 622 and the electrical outlet needs to be touched-up with paint, patched and repaired. Drywall around this electrical outlet needs to be patched and repaired. 4. Drywall area across from the boxed out column to the left of opening leading into Area 625, the south wall opposite this boxed out column dent in the drywall and marks on the drywall need to be sanded patched and repainted. 5 . Door 004A — Drywall to the right needs to be sanded and repainted. Also to the left at the fire alarm pull station . 6. Transition strip needed between ceramic tile and the concrete in stairs . 7. Ceiling grid along the wall of the exterior Exit Stair Door 004 and three grids off that door, grid is sagging. 8. Boxed out column on the north wall just to the right of opening into Production Room 625 vinyl base needs to be secured and right corners need to be sanded and repainted, left corner is chipped needs to be repainted. 9. Drywall area leading into Corridor 624 off of Open Office Area 603, where the fire alarm horn strobe is, drywall around the fire alarm horn strobe needs to be patched and repaired, opening cut too large. This wall need to be touched-up with paint the complete length of the wall from the boxed out column, which is to the right of Door 633 down to the right outside corner of Office Area 637 on the north wall, needs to be repainted approximately 2ft complete length of the wall . 10. Ceiling tiles above the header leading into the Corridor 624 needs to be set flush to the grid or repaired. 11 . Ceiling grid in this area above the header leading into Corridor 624 from Open Office Area 603 needs to be cleaned of drywall mud, dirt and debris. Corridor 606 1 . Wall to the right of Door 608 needs to be repainted around electrical outlet. Also the right outside corner to the right of this outlet vinyl base needs to be re-secured and drywall needs to be patched. 2. Drywall above the Johnson Control area needs to be touched-up with paint and the Johnson Control box needs to cleaned of dirt and debris. 3 . Drywall between Door 609 and 611 needs to be cleaned of dirt and debris and repainted where it has been touched-up and scuff marks, etc. 4. Drywall to the right of Door 611 needs to be repainted from floor to ceiling in this general area. That is also to the right and to the left of Door 611 . 5 . Drywall to the right of Door 612 needs to be repainted from floor to ceiling. D O N A D I O & Associates, Architects, P.A .