|
' standard, specification , manual, code, or Laws or the terms and conditions thereof in one or more of the
<br /> following
<br /> Regulations in effect at the time of opening of Bids (or ways: (i) a Written Amendment; (ii) a Change Oilier, or (iii)
<br /> a
<br /> on the Effective Date of the Agreement if there were no Work Change Directive.
<br /> Bids), except as may be otherwise specifically stated in
<br /> ' the Contract Documents. B. The requirements of the Contract Documents may be
<br /> supplemented, and minor variations and deviations in the Work
<br /> 2. No provision of any such standard, specification, may be authorized, by one or more of the following ways: (i) a
<br /> manual or code, or any instruction of a Supplier shall be Field Order, (ii) ENGINEER's approval of a Shop Drawing or
<br /> effective to change the duties or responsibilities of Sample; or (iii) ENGINEER's written interpretation or
<br /> OWNER, CONTRACTOR, or ENGINEER, or any of clarification.
<br /> their subcontractors, consultants, agents, or employees
<br /> from those set forth in the Contract Documents, nor 3.05 Reuse of Documents
<br /> shall any such provision or instruction be effective to
<br /> assign to OWNER, ENGINEER, or any of ENGINEER's A CONTRACTOR and any Subcontractor or Supplier or
<br /> Consultants, agents, or employees any duty or authority other individual or entity performing or furnishing any of the
<br /> to supervise or direct the performance of the Work or Work under a direct or indirect contract with OWNER: (i) shall
<br /> any duty or authority to undertake responsibility not have or acquire any title to or ownership rights in any of the
<br /> inconsistent with the provisions of the Contract Drawings, Specifications, or other documents (or copies of any
<br /> Documents. thereof) prepared by or bearing the seal of ENGINEER or
<br /> ENGINEER's Consultant, including electronic media editions;
<br /> 3.03 Reporting and Resolving Discrepancies and (ii) shall not reuse any of such Drawings, Specifications,
<br /> ' other documents, or copies thereof on extensions of the Project
<br /> A. Reporting Discrepancies or any other project without mitten consent of OWNER and
<br /> ENGINEER and specific written verification or adaption by
<br /> 1 . If, during the performance of the Work, ENGINEER. This prohibition will survive final payment,
<br /> CONTRACTOR discovers any conflict, error, ambiguity, completion, and acceptance of the Work, or termination or
<br /> or discrepancy within the Contract Documents or completion of the Contract. Nothing herein shall
<br /> preclude
<br /> between the Contract Documents and any provision of CONTRACTOR from retaining copies of the Contract
<br /> any Law or Regulation applicable to the performance of Documents for record purposes.
<br /> ' the Work or of any standard, specification, manual or
<br /> code, or of any instruction of any Supplier,
<br /> CONTRACTOR shall report it to ENGINEER in writing ARTICLE 4 - AVAILABILITY OF LANDS; SUBSURFACE AND
<br /> at once. CONTRACTOR shall not proceed with the PHYSICAL CONDITIONS; REFERENCE POINTS
<br /> Work affected thereby (except in an emergency as
<br /> required by paragraph 6. 16A) until an amendment or
<br /> supplement to the Contract Documents has been 4.01 Avaiiability of Lands
<br /> issued by one of the methods indicated in paragraph
<br /> 3.04; provided, however, that CONTRACTOR shall not A. OWNER shall furnish the Site. OWNER shall notify
<br /> be liable to OWNER or ENGINEER for failure to report CONTRACTOR of any encumbrances or restrictions not of
<br /> any such conflict, error, ambiguity, or discrepancy general application but specifically related to use of the Site
<br /> with
<br /> unless CONTRACTOR knew or reasonably should have which CONTRACTOR must comply in performing the Work.
<br /> known ftreof OWNER will obtain in a timely manner and pay for easements
<br /> for permanent structures or permanent changes in existing
<br /> B. ResoMng Discmpancies facilities. If CONTRACTOR and OWNER are unable to agree
<br /> on entitlement to or on the amount or extent, if any, of any
<br /> 1 , Except as may be otherwise specifically stated in adjustment in the Contract Price or Contract Times, or both, as
<br /> the Contrad Documents, the provisions of the Contract a result of any delay in OWNER's furnishing
<br /> the Site,
<br /> Documents shall take precedence in resolving any CONTRACTOR may make a Claim therefore as provided in
<br /> conflict error, ambiguity, or discrepancy between the paragraph 10.05.
<br /> provisions of the Contract Documents and:
<br /> B. Upon reasonable written request, OWNER shall
<br /> a. the provisions of any standard, specification, fumish CONTRACTOR with a current statement of record legal
<br /> manual, code, or instruction (whether or not title and legal description of the lands upon which the Work is to
<br /> specifically incorporated by reference in the be perfomred and OWNER's interest therein as necessary for
<br /> ' Contract Documents); or giving notice of or filing a mechanic's or construction lien against
<br /> such lands in accordance with applicable Laws and
<br /> b. the provisions of any Laws or Regulations Regulations.
<br /> applicable to the performance of the Work (unless
<br /> such an interpretation of the provisions of the C. CONTRACTOR shall provide for all additional lands
<br /> Contract Documents would result in violation of and access thereto that may be required
<br /> for temporary
<br /> such Law or Regulation). construction facilities or storage of materials and equipment.
<br /> 3.04 Amending and Supplementing Contract Documents 4.02 Subsurface and Physical Conditions
<br /> A The Contract Documents may be amended to provide A Reports and Drawings. The Supplementary
<br /> for additions, deletions, and revisions in the Work or to modify Conditions identify:
<br /> ' 00700 - 9
<br /> r
<br />
|