2008-213 - Laserfiche WebLink

Home Browse Search

SECTION 02539 SUBMERSIBLE PUMPING STATION PART 1 - GENERAL 1 . 01 RELATED WORK SPECIFIED ELSEWHERE A. Site Work Division 02000 Sections B . Concrete Work Division 03000 Sections C. Coating Systems Division 09000 Sections D . Electrical - General Division 16000 Sections 1 . 02 SCOPE OF SERVICES A. The pumping station shall consist of a wet well structure, two (2) submersible sewage pumps, an electrical control panel, liquid level controls, valve vault, valves, pump-out connection, electric meter, electric and water service and all appurtenant piping and equipment as shown on the Drawings and/or as specified. B . The Contractor shall furnish all labor, materials, equipment and incidentals required and install, place in operation, and field test a submersible wastewater pumping station. The station shall be complete with pumps, motors, piping, valves, buried electric service, electrical work (including motor controls and RTL), structures, connections and appurtenances, tested and ready for service . C . These specifications are intended to give a general description of what is required, but do not cover all details which will vary in accordance with the requirements of the equipment as offered. It is, however, intended to cover the furnishing, the shop testing, the delivery and complete installation and field testing, of all materials, equipment and appurtenances for the complete pumping units as herein specified and as shown on the Drawings, whether specifically mentioned in these specifications or not. D . For all units there shall be furnished and installed all necessary an desirable accessory equipment and auxiliaries whether specifically mentioned in these specifications or not, and as required for an installation incorporating the highest standard for the type of service including field testing of the entire installation and instructing the regular operating personnel in the care, operation and maintenance of all equipment. 1 .03 PUMP SYSTEM REQUIREMENTS A. qualifications : 1 . To assure unity of responsibility, the motors and control system shall be furnished and coordinated by the pump manufacturer. The Contractor and manufacturer shall assume responsibility for the satisfactory installation and operation of the entire pumping system, including pumps, motors, and controls as specified. 2. The pumps covered by these specifications are intended to be standard pumping equipment of proven ability as manufactured by a reputable manufacturer having long experience in the production of such pumps. The pumps furnished shall be designed, constructed and installed in accordance with the best practice and methods, 025394 02539 ,, Submersible Pump Station (Rev.)