Laserfiche WebLink
I L <br />SECTION 02440 <br />CONCRETE DRIVEWAYS, CURBS, SLABS ON GRADE AND SIDEWALKS <br />PART 1 -- GENERAL <br />1.01 SUMMARY <br />A. Provide all labor, materials, equipment and transportation required for the construction of <br />the concrete driveway, curbs, slabs on grade, and walks to the lines and grades as shown <br />on the Drawings and specified herein. <br />1.02 QUALITY ASSURANCE <br />A. Testing and inspections: See Section 02752. <br />B. Materials and methods shall comply with the standards indicated. <br />C. Obtain concrete from a plant currently certified to comply with approval of requirements of <br />the Concrete Materials Engineering Council, or the Florida Department of Transportation, <br />or the Check List for Plant Certification of the National Ready Mixed Concrete <br />Association. <br />1.03 SUBMITTALS <br />The following shall be submitted to the Engineer: <br />A. Concrete mix design. <br />B. Product literature for joint sealer, joint filler and curing compound. <br />C. Product literature for synthetic fiber reinforcement. <br />D. Concrete cylinder strength test results. <br />E. Slump test results. <br />F. Ready mixed concrete: Provide delivery tickets orweigh master's certificate perASTM C- <br />94, including weights of cement and each size of aggregate. Amount of water in <br />aggregate, and amount of water added at the plant. Write in amount of water <br />added on the job. <br />PART 2 ==PRODUCTS <br />2.01 MATERIALS <br />A. Concrete: Concrete for slabs on grade, walks, driveway, and curbs shall be structural <br />Class I that conforms to the requirements of FDOT Standard Specifications for Road and <br />Bridge Construction, 2007, Section 346, Portland Cement Concrete, with 28 -day <br />compressive strength of 3000 psi unless shown otherwise on the Drawings. <br />02440=1 02440 — Concrete Driveways, etc... <br />