Laserfiche WebLink
East Roseland QAPP <br /> Section B <br /> Revision No . _ <br /> Date : 11 / 16/04 <br /> Page 20 of 22 <br /> QC checks will be performed throughout the project to ensure the generation of <br /> reliable data . The equipment will be calibrated and programmed prior to <br /> installation at the project site and a record of the calibration will be recorded in <br /> the field logs . The automated samplers will be checked periodically and after <br /> each rainfall event to ensure proper function . <br /> Two equipment blanks will be taken during initial post-construction set- up using <br /> laboratory-supplied deionized water and adhering to the procedures outlined in <br /> FDEP SOPs . <br /> B6 . Instrument/Equipment Testing , Inspection & Maintenance <br /> The equipment will be checked periodically and after every rainfall event to <br /> ensure proper function . Maintenance will be performed if necessary . These <br /> activities will be recorded in the field log . Laboratory equipment will be tested <br /> and maintained according to the requirements outlined in the Laboratory SOPs , <br /> B7 . Instrument Calibration and Frequency <br /> The equipment will be programmed and calibrated prior to installation at the <br /> Project site according to manufacturers guidelines (America Sigma Model 900 <br /> MAX) and a record of the calibration will be kept with the equipment and <br /> recorded in the field log . Laboratory equipment will be calibrated according to the <br /> requirements outlined in the Laboratory SOPs . <br /> B8 . Inspection/Acceptance Requirements for Supplies <br /> The equipment (tubing , autosamplers , sample bottle , flow meter) will be visually <br /> inspected by Michael Wickwire to ensure proper function and recorded in the <br /> field log . <br /> B9 . Data Acquisition Requirements for Non -direct Measurements <br /> No data from non -direct measurements is planned for this project . <br /> B10 . Data Management <br />