2/21/1968 - Laserfiche WebLink

Home Browse Search

read: The applicant's approved set shall remain at all times on the job. Such information on drawings and specifi- cations shall be specific, and this code shall not be cited as a whole or in part, nor shall the term 'legal' or its equivalent be used as a substitute for specific information. Drawings for each application that involves the construction, installation or modification of a septic tank or absorption field or well shall show the location of the septic tank, absorption field and well and the location of the neighboring septic tank, absorption field or well. „ (9) Schedule of Permit Fees. Section 106.3(a) is amended to "PLUMBING. PERMIT FEES When application for permit is approved and before a permit is issued, a fee therefor shall be paid based on the following schedule of rates: (a) For each fixture roughed in and installed on new or reconstructed plumbing, or each fixture outlet roughed in $2.50" (b) For each water heater 2.50 (c) For each septic tank to 1,200 gallons 4.00. For each septic tank over 1, 200 gallons 5.00 (d) For each grease trap 2.'00 (e) For each sewer connection 4.00 (f) For inspection of remodeling or repairs on waste, soil, vent, drain or sewer pipes 4.00 (g) For each lawn sprinkler system, air con- ditioning, refrigeration, or cooling unit, connected to the city water and sewer 3.00 (h) For each re -inspection made due to the work being condemned or not being ready at the time specified 2.00 (i) For each roof drain 2.25 (j) For each area drain 2.25 (k) For each water service: connection to a municipal or private multiple water supply system: First meter on each lot (within municipality) 1.00 First meter on each Tot (outside municipality to City water system) 4.00 For each additional meter on same lot . 50 (1) Water connection to or outlets for an appliance or installation not covered by fixture permit 33 FEB 2 11968 1.00 NU 11 PAtE139