Laserfiche WebLink
4 . All details on shop drawings shall show clearly the relation of the various parts to <br /> the main members and lines of the structure and where correct fabrication of the <br /> work depends upon field measurements , such measurements shall be made and <br /> noted on the drawings before being submitted . <br /> 5 . Submittals for equipment specified under Divisions 1 1 shall include a listing of all <br /> installations where identical or similar equipment has been installed and been in <br /> operation for a period of at least one year. <br /> B . Product Data <br /> 1 . Product data as specified in individual Sections include, standard prepared data <br /> for manufactured products (someti â–ºnes referred to as catalog data) , such as the <br /> manufacturer' s product specification and installation instructions , availability of <br /> colors and patterns , manufacturer' s printed statements of compliances and <br /> applicability, roughing- in diagrams and templates, catalog cuts , product <br /> photographs , standard wiring diagrams, printed performance curves and <br /> operational-range diagrams , production or quality control inspection and test <br /> reports and certifications , mill reports , product operating and maintenance <br /> instructions and recommended spare- parts listing and printed product warranties , <br /> as applicable to the work . <br /> C . Samples <br /> 1 . Samples specified in individual Sections include , physical examples of the work <br /> such as sections of manufactured or fabricated work, small cuts or containers of <br /> materials , complete units of repetitively- used products , color/texture/pattern <br /> swatches and range sets , specimens for coordination of visual effect, graphic <br /> symbols and units of work to be used by the Engineer or Owner for independent <br /> inspection and testing, as applicable to the work. <br /> 2 . The Contractor shall prepare a transmittal letter in triplicate for each shipment of <br /> samples . Contractor shall enclose a copy of this letter with the shipment and send <br /> a copy of this letter to the Engineer . Approval of a sample shall be only for the <br /> characteristics or use named in such approval and shall not be construed to change <br /> or modify any Contract Requirements . <br /> 1 . 03 CONTRACTOR' S RESPONSIBILITIES <br /> A . Review shop drawings , product data and samples , including those by subcontractors , prior <br /> to submission to determine and verify the following : <br /> 1 . Field measurements <br /> 2 . Field construction criteria <br /> 3 . Catalog numbers and similar data <br /> 4 . Conformance with related Sections <br /> B . Each shop drawing, sample and product data submitted by the Contractor shall have <br /> affixed to it the following Certification Statement including the Contractor's Company <br /> name and signed by the Contractor : " Certification Statement: by this submittal , I hereby <br /> represent that I have determined and verified all field measurements , field construction <br /> criteria, materials, dimensions , catalog numbers and similar data and 1 have checked and <br /> coordinated each item with other applicable approved shop drawings and all Contract <br /> requirements . " Shop drawings and product data sheets 11 - inch by 17 - inch and smaller <br /> shall be bound together in an orderly fashion and bear the above Certification Statement <br /> 01340 -2 <br />