Laserfiche WebLink
Twl <br /> n4 I VI <br /> ij <br /> Inn <br /> In <br /> ..,' a.f1 16 ,x ,`L .} , 41 <br /> these Specifications . Training shall be provided on an 8 -ho <br /> ur per(less than eight ( 8 ) full working hours) shall not be credited toward a the <br /> specified al days <br /> durations . Training shall not be concurrent with on -going testing debugging or <br /> installation activities ; but shall be a separate activity devoted exclusively to the <br /> instruction of the Owner's personnel in the operation and maintenance of the <br /> Manufacturer' s equipment. Training shall be performed by qualified representatives of <br /> each equipment Manufacturer specifically skilled in providing instruction to operation <br /> personnel . Training shall provide an overview of operations and maintenance <br /> requirements and shall include but not be limited to : <br /> 1 • Description of unit and component parts, <br /> 2 . Operating capabilities and performance criteria, <br /> 3 . Operating procedures , <br /> 4 . Maintenance procedures , <br /> 5 . Servicing and lubrication schedules, <br /> 66 Troubleshooting, and <br /> 7 . Electrical instrumentation and control requirements and interface as a minimum . <br /> The operating and maintenance data to be provided in accordance with <br /> Specification Section 01730 shall be used as a basis for training. <br /> F . A certificate from the Manufacturer stating that the installation of the equipment is <br /> satisfactory, that the unit has been satisfactorily tested, is ready for operation, and that the <br /> operating personnel have been suitably instructed in the operation, lubrication , and care <br /> of the unit shall be submitted before start-up and acceptance by the Owner. The <br /> certificate shall indicate date and time instruction was given and names of operating <br /> personnel in attendance . This certification shall be submitted on the certification sheet <br /> 40 the form of which is at the end of this section . <br /> G . See the detailed Specifications for additional requirements for furnishing the services of <br /> the Manufacturer' s field service technician . <br /> In <br /> K For equipment furnished under Divisions other than 11 , 15 and 16 , the Contractor, unless <br /> otherwise specified, shall furnish the services of accredited field services technicians of <br /> the Manufacturer only when some evident malfunction or over-heating makes such <br /> services necessary in the opinion of the Engineer. <br /> 1 . 28 OPERATING AND MAINTENANCE DATA <br /> A . Operating and maintenance data covering all equipment furnished shall be delivered <br /> directly to the Orlando office of PBS &J, for approval within 60 days of shop drawing <br /> approval of each piece of equipment. No payment shall be made for equipment installed <br /> or stored on - site until the Engineer has approved the adequacy and completeness of the <br /> operating and maintenance data . Data shall be prepared and submitted in full <br /> conformance with Section 01730 . Final approved copies of operating and maintenance <br /> data shall have been delivered to the Engineer on Owner's behalf two weeks prior to <br /> scheduling the instruction period with the Owner. <br /> END OF SECTION <br /> 01 170- 8 <br /> 7777 <br /> 7r ll <br /> :4 <br /> -rIn 61 <br /> 6 n6 <br /> Inn <br /> ,. <br />