2008-180 - Laserfiche WebLink

Home Browse Search

Mr. Himanshu Mehta, P.E. 26 February 2008 Page 6 of 11 Application will be required for this work. Geosyntec will provide four complete copies of the application to FDEP Central District and two copies to SWDD. Task 3: Response to Regulatory Comments Following submittal of the permit modification application, Geosyntec will meet with FDEP to present and discuss the contents of the application. Geosyntec will provide FDEP with written responses to requests for additional information (RAI) throughout the course of the permit review process. For the purpose of the budget estimate, Geosyntec has estimated. response to one RAI will be required. Phase 3: Construction Procurement Services Geosyntec will provide the engineering services required for SWDD to procure the construction of the following: (i) Class I landfill vertical expansion liner system; (ii) expansion and upgrade of the GCCS; and (iii) operation of the on-site borrow pit for supply of fill material. It is understood that SWDD will contract the construction services of the project to WMIF, the current contractor for operation of the Class I landfill, including the on-going placement of C&D debris on Segment 1. As part of this phase, Geosyntec will prepare construction documents and a construction cost estimate as described below. Task 3.1: Construction Documents Geosyntec will prepare a set of construction drawings for each of the three components of the construction project. The construction drawings for the Class I landfill vertical expansion will be extracted from the permit application drawings and will include sufficient details necessary for construction of each component of the project. The construction drawings will include control points along the top of berms, toes of slopes, and other critical locations, including 50 -ft grid intervals, liner system details, and cross sections to facilitate construction and certification of the project. Construction drawings for the GCCS and borrow pit operations will be prepared, as necessary. Technical Specifications and the CQA Plan will be compiled as part of the Construction Documents. The specifications will be prepared using the industry -standard Construction Specification Institute (CSI) format. Task 3.2: Construction Cost Estimate Geosyntec will also prepare an Engineer's Estimate of Probable Construction Cost for the three phases of the project to serve as a basis for comparison of bids from WMIF during the procurement process. Probable construction cost will be based on estimated construction XL07232/JL80057_IRC PROPOSAL.doc engineers 1 scion t i':i 1 innovators