Laserfiche WebLink
D. <br />6. Roadway: <br />a. Stations and offset related to controlling baseline and elevations of all <br />structures, side street and major driveway radius returns (edge of <br />pavement), bends and/or change in direction of roadway alignment, OR <br />minimum at 1000' intervals along roadway alignment. <br />b. Elevations along Profile Grade Line (PGL), of all edge of pavements either <br />side of Profile Grade Line (PGL), at medians at the high/low and PVI <br />points along Profile Grade Line (PGL). <br />c. All final Elevations to be plotted on PGL AND Plan - Profile sheets as <br />applicable. <br />d. Elevations of edge of pavement and flow line at curb inlets and on the <br />adjacent edge of pavement at curb inlets. <br />1. Survey Control: Install/re-establish new roadway alignment control points <br />(Survey Baseline or controlling line and all points as indicated on the plans or <br />control sheet) upon final roadway completion. Include all intersections and side <br />streets. State Plane Coordinates and elevations for all control points. <br />2. Either if shown on plans or not: Any Public Land Corner or Governmental <br />Survey Control point(s) destroyed and/or disturbed during the scope of the <br />project shall be properly re-established as per standards as set forth within <br />Florida Statutes, Administrative code and Minimum Technical Standards for <br />that type of survey. All said surveying mentioned above shall be performed <br />under the direct supervision of a registered Professional Surveyor and Mapper <br />in the state of Florida and certified accordingly. Said Governmental agency(s) <br />shall be notified in writing of disturbance and re -establishments. <br />RECORD/AS-BUILTS DRAWINGS FORMAT - SUBMITTALL <br />A. ENGINEER will supply the CONTRACTOR with the electronic file of the <br />approved construction plans for the input of the As -Built information. <br />B. CONTRACTOR shall deliver seven (7) certified sets of Record/As-Builts with <br />an Electronic Drawing files prepared in AutoCAD 2007 AND PDF format or in <br />current version as agreed by the ENGINEER. <br />C. CONTRACTOR's surveyor shall review, sign and seal As-Builts or Record <br />drawing(s). Said drawing(s) shall clearly state, type of survey, positional <br />tolerances, adhere and be certified to by a registered Professional Surveyor <br />and Mapper in the state of Florida, any standards set forth by Florida <br />Statutes, Administrative code and Minimum Technical Standards for As- <br />Built/Record surveys. <br />D. All Record/As-Built drawings are subject to review and approval by County <br />Surveyor. <br />01720-3 01720 Record Documents <br />