Laserfiche WebLink
B Product Data: Manufacturer's data sheets on each product to be used, including: <br />1. Preparation instructions and recommendations. <br />2. Storage and handling requirements and recommendations. <br />3. Installation methods. <br />C. Shop Drawings. Indicate plans and elevations including opening dimensions and required tolerances, <br />connection details, anchorage spacing, hardware locations, and installation details. <br />D Manufacturer's Certificates: Certify products meet or exceed specified requirements. <br />E. Operation and Maintenance Data. <br />1.6 QUALITY ASSURANCE <br />A. Manufacturer Qualifications. Company specializing in manufacturing products specified in this <br />section with minimum five years documented experience. <br />B. Installer Qualifications Authorized representative of the manufacturer with minimum five years <br />documented experience. <br />C. Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories, Inc. <br />acceptable to authority having jurisdiction as suitable for purpose specified. <br />1 7 DELIVERY, STORAGE, AND HANDLING <br />A. Store products in manufacturer's unopened labeled packaging until ready for installation. <br />B Protect materials from exposure to moisture until ready for installation. <br />C. Store materials in a dry, ventilated weathertight location. <br />PART 2 PRODUCTS <br />2.1 MANUFACTURERS <br />a.Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may <br />be incorporated into the Work include, but are not limited to, the following: <br />1)Clopay Building Products Company, Inc. <br />2)Cookson Company <br />3)Cornell Iron Works Inc. <br />4)Overhead Door Corp. <br />5)Raynor. <br />6)Wayne-Dalton Corp <br />2.2 SECTIONAL STEEL OVERHEAD DOORS <br />A. Sectional Overhead Steel Doors: Units shall have the following characteristics: <br />1. Door Assembly. Steel door assembly with rabbeted meeting rails to form weathertight joints <br />and provide full -width interlocking structural rigidity. <br />a. Panel Thickness: 2 inches (51 mm). <br />b. Exterior Surface. Flush. <br />c. Section Material. 16 gauge, galvanized steel. <br />Indian River County Skeet and Trap 08630 — 2 <br />DAA Project No. 2013.04 11/12/15 Bid Set —ADDENDUM #1 <br />