2015-025B - Laserfiche WebLink

Home Browse Search

CONTRACTOR, any Subcontractor, Supplier, or any other individual or entity directly or indirectly employed 617 Shop Drawings and Samples by any of them to perform any of the Work, or anyone for whose acts any of them may be liable, shall be A. CONTRACTOR shall submit Shop Drawings remedied by CONTRACTOR (except damage or loss to ENGINEER for review and approval in accordance attributable to the fault of Drawings or Specifications with the acceptable schedule of Shop Drawings and or to the acts or omissions of OWNER or ENGINEER Sample submittals. All submittals will be identified as or ENGINEER's Consultant, or anyone employed by ENGINEER may require and in the number of copies any of them, or anyone for whose acts any of them specified in the General Requirements. The data may be liable, and not attributable, directly or shown on the Shop Drawings will be complete with indirectly, in whole or in part, to the fault or negligence respect to quantities, dimensions, specified perfor- of CONTRACTOR or any Subcontractor, Supplier, or mance and design criteria, materials, and similar data other individual or entity directly or indirectly employed to show ENGINEER the services, materials, and by any of them) CONTRACTOR's duties and equipment CONTRACTOR proposes to provide and responsibilities for safety and for protection of the to enable ENGINEER to review the information for the Work shall continue until such time as all the Work is limited purposes required by paragraph 6.17.E. completed and ENGINEER has issued a notice to OWNER and CONTRACTOR in accordance with B CONTRACTOR shall also submit Samples to paragraph 14 07 B that the Work is acceptable ENGINEER for review and approval in accordance (except as otherwise expressly provided in connection with the acceptable schedule of Shop Drawings and with Substantial Completion) Sample submittals. Each Sample will be identified clearly as to material, Supplier, pertinent data such as 614 Safety Representative catalog numbers, and the use for which intended and otherwise as ENGINEER may require to enable ENGI- A. CONTRACTOR shall designate a qualified NEER to review the submittal for the limited purposes and experienced safety representative at the Site required by paragraph 6.17 E. The numbers of each whose duties and responsibilities shall be the Sample to be submitted will be as specified in the prevention of accidents and the maintaining and Specifications. supervising of safety precautions and programs. C Where a Shop Drawing or Sample is required 615 Hazard Communication Programs by the Contract Documents or the schedule of Shop Drawings and Sample submittals acceptable to ENGI- A. CONTRACTOR shall be responsible for NEER as required by paragraph 2.07, any related coordinating any exchange of material safety data Work performed prior to ENGINEER's review and sheets or other hazard communication information approval of the pertinent submittal will be at the sole required to be made available to or exchanged be- expense and responsibility of CONTRACTOR. tween or among employers at the Site in accordance with Laws or Regulations. D Submittal Procedures 616 Emergencies 1. Before submitting each Shop Drawing or Sample, CONTRACTOR shall have A. In emergencies affecting the safety or protec- determined and verified: tion of persons or the Work or property at the Site or adjacent thereto, CONTRACTOR is obligated to act to a. all field measurements, quantities, prevent threatened damage, injury, or loss. dimensions, specified performance criteria, CONTRACTOR shall give ENGINEER prompt written installation requirements, materials, catalog notice if CONTRACTOR believes that any significant numbers, and similar information with changes in the Work or variations from the Contract respect thereto, Documents have been caused thereby or are required as a result thereof. If ENGINEER determines that a b all materials with respect to intended change in the Contract Documents is required be- use, fabrication, shipping, handling, storage, cause of the action taken by CONTRACTOR in assembly, and installation pertaining to the response to such an emergency, a Work Change performance of the Work; Directive or Change Order will be issued c. all information relative to means, methods, techniques, sequences, and procedures of construction and safety 00700-General Conditions REV 5-10-13.doc 00700-24 F Tublic Works\ENGINEERING DIVISION PROJECTS\0845B-Old Dixie Hwy Sidewalk(38th Ln-45th St)Vadmim\bid documents\Master Contract Documents\00700-General Conditions REV 5-10-13.doc