Laserfiche WebLink
1.05 <br />b. Supplier <br />C. Manufacturer e ph(s), <br />5. Identification of the product, with the section number, page and P ara rag p � <br />6. Field dimensions, clearly identified as such. <br />7, Relation to adjacent or critical features of the work or materials. <br />g. Applicable standards, such as ASTM or Federal Standards numbers. <br />9. Identification of deviations from Contract Documents. <br />10. Identification of revisions on resubmittals. <br />11. A blank space suitably sized for Contractor and Engineer stamps. <br />12. Contractor's stamp or review and approval, initialed or signed, certifying to review <br />of initialed or signed, certifyingto review of submittal, verification of products, field <br />measurements and field construction criteria, and coordination of the information <br />within the submittal with requirements of the work and of Contract Documents. <br />13. Where calculations are required to be submitted by the Contractor, the <br />calculations shall have been checked by a qualified individual other than the <br />preparer. The submitted calculations shall clearly show the names of the preparer <br />and of the checker. <br />REVIEW OF SHOP DRAWINGS, PRODUCT DATA, <br />SAMPLES <br />The review of shop drawings, data and samples will be for general conformance with the <br />design concept and Contract Documents. They shall not be,construed: <br />WORKING DRAWINGS AND <br />A. <br />