Laserfiche WebLink
Specifications: SlideDriver 50VF2/3 (222 X3 ST) <br />3.3. FIELD QUALITY CONTROL <br />A. Test operator through ten full open and close cycles and adjust for operation without binding, scraping <br />or uneven motion. Test limit switches for proper open and close limit positions. <br />B. All anchor bolts shall be fully tightened in the finished installation. <br />C. Owner, or owner's representative, shall complete "check list" with installing contractor prior to final <br />acceptance of the installation and submit completed warranty documentation to manufacturer. <br />3.4. CONTINUED SERVICE AND DOCUMENTATION <br />A. Train owner's personnel on how to safely shut off electrical power, release and manually operate the <br />gate. Additionally, demonstrate the general maintenance of the gate operator and accessories and <br />provide one copy of "Programming and Operations Manual" for the owner's use. Manuals will identify <br />parts of the equipment for future procurement. Direct maintenance personnel to the technical support <br />sections on HySecurity's website at www.hysecurity.com. <br />NOTE: HySecurity reserves the right to change these specifications at any time, without notice and without <br />prejudice. Call (800) 321-9947 if you are not sure that you have the latest edition. <br />CAUTION: Operators manufactured by HySecurity are intended for use in controlling vehicular traffic and are <br />not intended to be used by pedestrians or to control pedestrian traffic. Always install a separate pedestrian <br />gate. <br />www.hysecurity.com <br />Specification D0677 <br />