Laserfiche WebLink
SECTION 0140 00 <br /> QUALITY REQUIREMENTS <br /> PART 1 GENERAL <br /> 1.01 SECTION INCLUDES <br /> A. This Section includes administrative and procedural requirements for quality assurance and <br /> quality control. <br /> 1.02 RELATED DOCUMENTS <br /> A. Drawings and general provisions of the Contract, including General and Supplementary <br /> Conditions and Specification Sections,apply to this Section. <br /> 1.03 DEFINITIONS <br /> A. Quality-Assurance Services: Activities,actions,and procedures performed before and dur- <br /> ing execution of the Work to guard against defects and deficiencies and ensure that pro- <br /> posed construction complies with requirements. <br /> B. Quality-Control Services: Tests, inspections, procedures, and related actions during and <br /> after execution of the Work to evaluate that completed construction comply with require- <br /> ments. Services do not include contract enforcement activities performed by Engineer. <br /> C. Testing Agency: An entity engaged to perform specific tests,inspections,or both. Testing <br /> laboratory shall mean the same as testing agency. <br /> 1.04 DELEGATED DESIGN <br /> A. Performance and Design Criteria: Where professional design services or certifications by <br /> a design professional are specifically required of Contractor by the Contract Documents, <br /> provide products and systems complying with specific performance and design criteria in- <br /> dicated. <br /> 1. If criteria indicated are not sufficient to perform services or certification required, <br /> submit a written request for additional information to Engineer. <br /> 1.05 SUBMITTALS <br /> A. Permits, Licenses, and Certificates: For Owner's records, submit copies of permits, li- <br /> censes, certifications, inspection reports, releases,jurisdictional settlements, notices, re- <br /> ceipts for fee payments,judgments, correspondence, records, and similar documents, es- <br /> tablished for compliance with standards and regulations bearing on performance of the <br /> Work. <br /> 1.06 QUALITY ASSURANCE <br /> A. It is the intent under this contract that workmanship shall be of the best quality consistent <br /> with the materials and construction methods specified. The presence or absence of the <br /> Owner's or Engineer's representative shall in no way relieve the Contractor of his respon- <br /> sibility to furnish materials and construction in full compliance with the drawings and spec- <br /> ifications. The Owner and Engineer shall have the authority to judge the quality and require <br /> Sebastian Corners Roof Replacement 01 40 00-1 Quality Requirements <br />