Laserfiche WebLink
1.05 WARRANTY <br /> A. Existing Warranties: Remove, replace, patch, and repair materials and surfaces cut or <br /> damaged during cutting and patching operations, by methods and with materials so as not <br /> to void existing warranties. <br /> PART 2 PRODUCTS <br /> 2.01 MATERIALS <br /> A. General: Comply with requirements specified in other Sections of these Specifications. <br /> B. Existing Materials: Use materials identical to existing materials. For exposed surfaces, <br /> use materials that visually match existing adjacent surfaces to the fullest extent possible. <br /> 1. If identical materials are unavailable or cannot be used, use materials that, when <br /> installed,will match the visual and functional performance of existing materials. <br /> PART 3 EXECUTION <br /> 3.01 EXAMINATION <br /> A. Examine surfaces to be cut and patched and conditions under which cutting and patching <br /> are to be performed. <br /> 1. Compatibility: Before patching,verify compatibility with and suitability of sub- <br /> strates, including compatibility with existing finishes or primers. <br /> 2. Proceed with installation only after unsafe or unsatisfactory conditions have been <br /> corrected. <br /> 3.02 PREPARATION <br /> A. Temporary Support: Provide temporary support of Work to be cut. <br /> B. Protection: Protect existing construction during cutting and patching to prevent damage. <br /> Provide protection from adverse weather conditions for portions of Project that might be <br /> exposed during cutting and patching operations. <br /> C. Adjoining Areas: Avoid interference with use of adjoining areas or interruption of free <br /> passage to adjoining areas. <br /> D. Existing Services: Where existing services are required to be removed, relocated, or <br /> abandoned, bypass such services before cutting to minimize interruption of services to <br /> occupied areas. <br /> 3.03 PERFORMANCE <br /> A. General: Employ skilled workers to perform cutting and patching. Proceed with cutting <br /> and patching at the earliest feasible time, and complete without delay. <br /> 1. Cut existing construction to provide for installation of other components or per- <br /> formance of other construction,and subsequently patch as required to restore sur- <br /> faces to their original condition. <br /> B. Cutting: Cut existing construction by sawing, drilling, breaking, chipping, grinding, and <br /> Sebastian Corners Roof Replacement 01 73 29-2 Cutting and Patching <br />