2018-168A - Laserfiche WebLink

Home Browse Search

1.06 I. Specialists: Certain sections of the Specifications require that specific construction activ- ities shall be performed by entities who are recognized experts in those operations. Spe- cialists shall satisfy qualification requirements indicated and shall be engaged for the ac- tivities indicated. J. Testing Agency Qualifications: An agency with the experience and capability to conduct testing and inspecting indicated, as documented by ASTM E 548, and that specializes in types of tests and inspections to be performed. K. Fabricator Qualifications: A firm experienced in producing products similar to those indi- cated for this Project and with a record of successful in-service performance, as well as sufficient production capacity to produce required units. L. Factory -Authorized Service Representative Qualifications: An authorized representative of manufacturer who is trained and approved by manufacturer to inspect installation of manufacturer's products that are similar in material, design, and extent to those indicated for this Project. QUALITY CONTROL A. The authorized representatives and agents of Owner shall be permitted to inspect all work, materials, payrolls, records of personnel, invoices of materials, and other relevant data and records. B. Owner Responsibilities: Where quality -control services are indicated as Owner's respon- sibility, Owner will engage a qualified testing agency to perform these services. 1. Owner will furnish Contractor with names, addresses, and telephone numbers of testing agencies engaged and a description of the types of testing and inspecting they are engaged to perform. 2. Costs for retesting and reinspecting construction that replaces or is necessitated by work that failed to comply with the Contract Documents will be charged to Con- tractor. C. Contractor's Responsibilities: 1. Repair and protection of work and materials are Contractor's responsibility. 2. Should any work or materials not conform with requirements of the Specifications or become damaged during the progress of the work, such work or materials shall be removed and replaced, together with any work disarranged by such alterations, at any time before completion and acceptance of the project. All such work shall be done at the expense of the Contractor. 3. Contractor will coordinate documents with manufacturer and perform such testing, reporting, and communication incidental to provisions of the warranty procedures. 4. Inclement Weather a. In the event of temporary suspension of work as during inclement weather, or whenever the Engineer shall direct, the Contractor will protect carefully its work and materials against damage or injury from weather. If, in the opinion of the Engineer, any work or materials have been damaged or in- jured by reason of failure of the Contractor to protect its work, such mate- rials shall be removed and replaced at the expense of the Contractor. b. During inclement weather and temporary suspension of work, the Con- tractor shall inspect the facility no later than 9:00 AM each day for leaks Indian River County West WWTP Roof Replacement 014000-4 Quality Requirements