Laserfiche WebLink
(j) Enter any past reportable releases that have occurred in the last five (5) years at the <br />facility in the Notes tab of the Facility Page. Include a copy of the Section 304 follow- <br />up report submitted to the LEPC. If it is determined that a facility has not had an <br />accident, that shall be noted. <br />(k) Enter the maximum number of occupants present at the facility at any given time in <br />the Maximum Number of Occupants Fields on the ID and Regs tab. <br />(I) Select either the manned or unmanned check box and if the facility is subject to <br />Section 112(r) and/or Section 302 of EPCRA. (All facilities should be subject to <br />Section 302 unless a Statement of Determination (SOD) was submitted). <br />2. Hazard Identification (CAMEOfm Chemical in Inventory Page) <br />(a) For each Extremely Hazardous Substance (EHS) present over the Threshold <br />Planning Quantity (TPQ), create a Chemical in Inventory page (if a Chemical in <br />Inventory page hasn't been created already) and enter the proper Chemical Name <br />and Chemical Abstract Service (CAS) number. <br />(b) Choose the appropriate description for the Type of Storage Container (drum, <br />cylinder, tank etc.), Storage Pressure (ambient, greater than ambient etc.) and <br />Storage Temperature (ambient, greater than ambient etc.) of each Extremely <br />Hazardous Substance (EHS) in those fields on the Location tab. <br />(c) On each Chemical in Inventory page created for each Extremely Hazardous <br />Substance (EHS) present over the TPQ, enter in pounds (not range codes) the <br />maximum quantity of each Extremely Hazardous Substance (EHS) in the Max Daily <br />Amount field of the Physical State and Quantity tab. <br />(d) Enter the amount (in pounds) of each Extremely Hazardous Substance (EHS) <br />stored in the largest container or interconnected containers in the Max amount in <br />largest container field of the Physical State and Quantity tab (this is the amount used <br />to determine the Vulnerable Zone in the scenario). <br />(e) Enter the Nature of the Hazard in the Physical State and Quantity tab section in the <br />Hazards subtab (acute, chronic, fire, pressure, etc.). See CAMEOfm Chemicals at <br />the top right and click box — look -up "Chemical". <br />Vulnerability Analysis (CAMEOfm Scenario Page) <br />(a) For each Extremely Hazardous Substance (EHS) present over the Threshold <br />Planning Quantity (TPQ). create a New Scenario page (if a Scenario page hasn't <br />been created already) and enter the maximum amount in the largest container or <br />interconnected containers in the Amount Released field of the Scenario Description <br />tab. <br />(b) On the Scenario page(s) Scenario Description tab, enter the concentration <br />percentage in the Concentration field. <br />(c) On the Scenario page(s) Scenario Description tab, enter the release duration in the <br />Release Duration field as follows: <br />(1) Gases — 10 minutes <br />21 <br />