Laserfiche WebLink
IRC-1838 Indian River County <br />Main Library <br />Roof Replacement 05 31 23-1 Steel Roof Deck Repair <br />SECTION 05 31 23 <br />STEEL ROOF DECK REPAIR <br /> GENERAL <br />1.1 SECTION INCLUDES <br />A. Inspection, evaluation and remediation of existing steel roof deck. Remediation shall <br />consist of the following: <br />1. Repair of surface rust and through holes in steel decking. <br />2. Replacement of damaged or deteriorated steel decking. <br />B. Provide mechanical fasteners to secure steel decking to steel framing and to secure deck <br />side and end laps. <br />1.1 RELATED SECTIONS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Specification Sections, apply to this Section, including but not limited to: <br />1. Rough Carpentry Section 06 10 00 <br />2. Preparation for Reroofing Section 07 01 50 <br />3. Modified Bitumen Roofing Section 07 52 16 <br />4. Storm Drainage Section 22 14 00 <br />1.2 REFERENCES <br />A. American Iron and Steel Institute (AISI) Standard- North American Specification for the <br />Design of Cold-Formed Steel Structural Members, 2001 Edition with Supplement 2004. <br />B. Steel Deck Institute, Inc. (SDI) Design Manual for Composite Decks, Form Decks, and <br />Roof Decks (No. 31, 2007). <br />C. American Institute of Steel Construction (AISC) Steel Construction Manual, 14th Edition. <br />D. FM Global Data Sheet 1-28 Wind Loads to Roof Systems (Revised January 2000). <br />E. American Welding Society (ANSI/AWS) D1.3 Structural Welding Code/Sheet Steel – 98 <br />Structural Welding Code – Sheet Steel. <br />F. ASTM International <br />1. A653 (A653M)-06 Standard Specification for Steel Sheet, Zinc-Coated <br />(Galvanized) or Zinc-Iron Alloy - Coated (Galvannealed) by the Hot-Dip Process. <br />2. A924 (A924M)-06 Standard Specification for General Requirements for Steel <br />Sheet, Metallic Coated by the Hot-Dip Process. <br />3. A 108-07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished. <br />1.3 SUBMITTALS <br />A. Refer to Section 01 33 00-Submittal Procedures. <br />B. Manufacturer’s Product Data Sheets for all materials specified certifying material complies <br />with all specified requirements.