2021-166 - Laserfiche WebLink

Home Browse Search

prepare progress summaries and review/process subconsultant contracts and payment. Subtask 1.3 Coordination with Heartland The Consultant will work closely with the County and Heartland to review the overall design, equipment specifications and construction plan of the evaporation system. The Consultant will serve as the Owner's representative and will review the details of the system integration between the Heartland Facility equipment and SWDD's proposed landfill assets. This task will include the following activities: ■ Allocate and assign key engineering resources (such as controls, mechanical, and process engineers) as necessary to support the project during critical design review stages; ■ Review detailed drawings, calculations and other information submitted by the Heartland engineering team. These may include natural gas and LFG piping designs, mechanical piping drawings, electrical and controls designs for valves, instruments and other electrical equipment that could affect the landfill assets. ■ Review the master project schedule and provide comments to SWDD regarding risks in achieving critical milestones by the developer. Please note that to do this, the Consultant will request monthly schedule updates from Heartland and provide comments as necessary. ■ The Consultant will monitor the engineering and coordination performed by developer/contractor of the facility. ■ The Consultant will review all design and equipment specifications regarding the integration of piping with the landfill system. ■ Perform site visits if necessary (travel expenses to be invoiced as incurred for the necessary number of site visits). Task 2: Landfill Gas Skid Design Design of the landfill gas skid modifications will include coordination with the RNG (IRED) and evaporation system (Heartland Technologies) providers to ensure that the proposed modifications meet the needs (pressure, moisture content, flow, etc.) of each project. Anticipated modifications are as follows: 1. Coordination of integration and controls between the LFG skid and the evaporation system, including automation suitable to adjust for operational changes by either the landfill or evaporation system. Anticipate addition of various sensors, modulating valves and a variable frequency drive. 2. New Control panel. 3. New high pressure blowers. Design will include the preparation of: ■ Process and Instrumentation Diagrams (P&IDs) ■ Process flow diagram including high pressure blowers; ■ Detailed mechanical drawings for the blower system; ■ Structural drawings as necessary to support new installation; Page 4 of 8