Laserfiche WebLink
Consultant will prepare design drawings for a new wellhead, similar in design and <br />configuration to the existing wellhead. It is assumed that the pump will be vertical <br />turbine type using flanged or threaded column pipe. The design documents will <br />consist of civil, mechanical, and electrical drawings that will include connection to <br />the existing 12 -inch raw watermain, use of the existing electrical service, and a new <br />fiber optic connection to allow direct communication of well with the water plant. <br />it is assumed the radio telemetry will be eliminated as part of this replacement. <br />It is assumed that approximately 10 -12 drawings will be prepared, consisting of: <br />• Cover sheet <br />• Overall site plan <br />• Civil details <br />• Wellsite plan & details <br />• Wellhead sections <br />• Mechanical details <br />• Electrical (single line, panel drawings, fiber optic) <br />The consultant will prepare technical specifications for construction and drilling of <br />a new supply well. <br />Consultant will prepare a 90% set of drawings and specifications for IRCU to <br />review, and incorporate comments into the final set of drawings and specifications <br />to be used for a change order request from the current contractor, and submission <br />to FDEP for permitting. <br />Consultant will design modifications to the existing radio telemetry unit (RTU) at <br />well S -1R to include fiber optic connectivity using Ethernet communication. <br />Remote PLC's will be designed at the well to allow communication via Ethernet <br />over FO. Consultant will design well panel PLC hardware at the well #S-1 and <br />interface with existing system. <br />TASK 2 - RAW WATERMAIN - PREPARE DESIGN DRAWINGS AND <br />SPECIFICATIONS <br />CONSULTANT will develop construction plans for a 12 -inch or 16 -inch raw water <br />main using the latest aerials available in a plan/profile layout, from the proposed <br />wellsite near S -1R WELL to the water plant site using the proposed alignment. <br />Consultant will prepare and furnish drawings and standard details on 24"x36" size <br />sheets assumed to be at a scale of 1"=30' for the raw water main plan/ profile <br />174 <br />