Laserfiche WebLink
Laura Yonkers, PE, CFM <br />February 14, 2023 <br />Page 3 <br />TASK Z — BASIS OF DESIGN <br />The CONSULTANT will develop a Basis of Design Technical Memorandum (TM) and Contract <br />Documents (Drawings and Specifications) for the project. No permit applications are <br />expected since this is assumed to be a maintenance project. The TM will present conditions, <br />calculations, and concepts. <br />The Drawings will consist of General, Civil, and Structural Drawings. No electrical <br />engineering is expected. Drawings will be prepared using the CONSULTANT's presentation <br />standards. COUNTY -provided project details will be used to the extent practical. The <br />preliminary lists of drawings and specifications below are the basis for our design fee <br />estimate. <br />Drawing No. <br />Title <br />G-1 <br />Cover Sheet <br />G-2 <br />Drawing Index, Legend, and Abbreviations <br />G-3 <br />General Notes <br />C-1 <br />Existing Conditions and Demolition Plan <br />C-2 to C-3 <br />Distribution Manifold Plan <br />C-4 to C-5 <br />Distribution Manifold Details <br />S-1 <br />Structural Notes <br />S-2 <br />Structural Plan <br />S-3 to S-4 <br />Structural Details <br />■ Site plan sheets will be prepared with the following scales: Horizontal: 1 inch = 20 feet <br />(full-size 22 -x -34 -inch); and 1 inch = 40 feet (half-size sheets 11 -x -17 -inch). <br />■ Sections and details will be prepared with the following scales: Vertical: 1 inch = 5 feet <br />(full-size 22 -x -34 -inch); and 1 inch = 10 feet (half-size sheets 11 -x -17 -inch). <br />The CONSULTANT will develop one set of Technical Specifications in the Construction <br />Standards Institute 16 -Division format. The Specifications will be in the CONSULTANT's <br />standard format and will be tailored to the needs of this project. <br />• Division 0 - Front End Documents (provided by the COUNTY) <br />■ Division 1 - General Requirements <br />■ Division 2 - Site Construction <br />■ Division 3 - Concrete <br />■ Division 9 - Finishes (Painting and Coating) <br />■ Division 15 - Mechanical (Piping and Utilities) <br />