2023-193 - Laserfiche WebLink

Home Browse Search

7.4.9 Conduit Placement — Duct Plugs and Mechanical Ceiling Devices Following the installation of conduit where the communications cable is not immediately installed, use a duct plug to seal the ends of the conduit. Secure the pull line to the duct plug in such a manner that it will not interfere with installation of the duct plug and provide a watertight seal. 7.4.10 List of Items for OSP Conduit — Underground The items and services listed below are not an all-inclusive list. Furnish and install the following items as required: Conduit — 2" placed at 24", machine trenched, per foot. Conduit — 2" placed at 36", machine trenched, per foot. Conduit — 2" placed at 24", hand trenched, per foot. Conduit — 2" placed 3", hand trenched, per foot. Conduit — 2" extra pipe, per foot. Placement —1.25", innerduct, corrugated, colored, per foot. Placement — 4W 1.25", HDPE colored, per foot. MaxCell Innerduct — placement — 3 cell for 2" and larger conduits. Include preinstalled color -coded pull tapes for identification, pre -lubricated. Placement — cable direct bury, plow, 30" placement, per foot. Placement — 2" HDPE, directional bore, per foot. Placement — 2" HDPE, directional bore, special conditions, per foot. Placement — 8" HDPE, directional or, underwater way <10001f, per foot. Placement — 2" RGS per foot. Placement — 4" RGS per foot. Placement — 2" fiberglass, bridge mount, per foot. Placement — 4" fiberglass, bridge mount, per foot. Detectable Tracer Wire, per foot. Furnish and install a 14 GA tracer wire for placement in conduit. Detection — Detectable Marking Tape, per foot. Detection —jet line, per foot. ROW detection — ROW delineator marker post, orange, 6', per each. Cable Route Markers Furnish and install delineators that are tubular and designed and constructed of Type III HDPE material. Provide delineator assemblies that are ultraviolet stabilized, to help prevent their components from color fading, warping, absorbing water, and deteriorating with prolonged exposure to the elements. Provide delineator posts that have a cap that is orange in color. The delineator assemblies shall include the descriptive information "IRC—IS&T FIBER OPTIC CABLING, CALL BEFORE DIGGING, 772-226-4357" printed black on orange reflective background material that will not fade or deteriorate over time. The printed message shall be partially visible from all directions approaching the assembly. 7.5 FIBER OPTIC CABLING AND RELATED ITEMS 7.5.1 General Requirements 27