1999-338A - Laserfiche WebLink

Home Browse Search

EI 11 1. GENERAL SPECIFICATIONS A. GENERAL.: The requirements of the general, supplementary and special conditions of the contract specifications and drawings are hereby made a part of this section of the specifications. B. INTENT: It is the intent of the plans and specifications to provide a complete and operating installation including all obviously necessary items even though items are not indicated on the drawings or specifications. C. PERMITS, SALES TAX, ETC.: 1 he contractor shall secure and pay for all permits, State Was 'Tax, Federal Excise Tax, royalties and other taxes or fees as required for installation of a complete system as outlined herein and as shown on the plans. The contractor shall secure all necessary licenses and insurance. D. CODES: The work shall comply with the latest applicable requirements of the NEPA, the NEC, and all local codes governing this installation as a minimum standard unless specifications listed herein or shown on the ,plans require a higher minimum standard. E. BRANDS OF EQUIPMENT: Where one manufacturer only is named, the bids shall be based on furnishing equipment or materials by this manufacturer. Where two or more manufacturers are named, the bids shall be based on furnishing equipment or materials by this manufacturer named in the schedules or the first named manufacturer in specifications. Other named manufacturers may be used provided they meet the specifications and space limitations. Products of other manufacturers will be considered for use if in the engineer's opinion, the item requested for substitution is equal to that specified. Where no manufacturers are named, the contractor shall select equipment or material which meets the specifications. F. DEPARTURES FROM DRAWINGS: The contract drawings indicate the extent and general arrangements of equipment and systems. If any departures from the contract drawings are deemed necessary by the contractor, details of such departures and reasons therefore shall be submitted to the engineer for approval. No such departures shall be made without the prior written approval of the engineer. G. CHANGES: The contractor shall conform to all reasonable changes without additional cost to the owner. H. ERRORS AND OMISSIONS: All obvious errors and/or omissions its the above mentioned documents shall be called to the attention of the engineer at least four days prior to the bid date. If notification is not received, no extras to the original drawings and specifications will be authorized. ` I. GUARANTEE: The contractor shall provide a guarantee against defective workmanship, materials or equipment for a period of one year from the date of acceptance. This guarantee shall include all costs encountered in the replacing of defective work or materials. In the event the contractor fails to take action to correct any such defect within 24 /tours after receipt of written V 16A - 1 61