2000-054 - Laserfiche WebLink

Home Browse Search

0 0 El Technical Approach ® Page 14 beach. Overlap between frames shall be sufficient to allow for digital processing of the images, and the flight path shall be continuous for the duration of the flight. The limits of photography are anticipated to include the area presently being monitored by ground- based survey crews. Task 14.3 Construction Contract Drawings for Sectors 1, 2 and 3 Planform drawings will be prepared at 1" = 100' and will serve as the basis for the contract drawings in the final package sent to prospective bidders. The aerial photographs will serve as the base for computer-generated overlay of the final beachfill design planform (to be finalized following receipt of final permits and the baseline [pre - construction] survey). Construction drawings shall include the following features overlaid on the aerial photography raster images: . the design fill template depicting landward work limits, berm crest, Erosion Control Line and construction toe of fill, berm transition and fill taper tie-in points to the existing shoreline (north and south fill limits). . construction access and equipment/materials staging areas; . existing FDEP and intermediate survey reference monument locations and state plane coordinate values; and, . roads and other identifiable upland features as may be appropriate. Additional sheets will include the Project Title Sheet, borrow area bathymetry and isopach charts, borrow area cross-sections, beachfill cross-sections at approximately 500 -ft stations, and the pipeline access corridor. At this time, it is anticipated that thirty (30) sheets will be required to depict the above information for Sectors 1, 2 and 3 in their entirety, if all three Sector restoration projects are bid singularly. Submittals will be provided to the County at sixty and ninety percent for County review and comment. ATM shall revise submittals promptly and shall furnish a master set of 100% drawings for County approval prior to reproduction of copies suitable for distribution to prospective bidders. Task 14.4 Construction Contract Documents ATM shall prepare and transmit to the County for review and comment an eighty (80) percent level set of Contract Documents. Components of the Contract Documents that are the responsibility of ATM include the following: Supplemental General Specifications Technical Specifications Appendix Information (Permits, Grain Size Distribution Curves, Vibracore Logs, and Jet Probe Logs as appropriate). ATM assumes that preparation of all remaining sections of the Contract Documents are the responsibility of the County and will be furnished to ATM by the County for ATM assembly into a comprehensive Contract Document package. The eighty -percent subiniital wiii be prepared and subin tted to the County in a three-ring binder for Couniy review and comment.