Laserfiche WebLink
valve or fitting shall be the point of termination. All required pipe lining, coating, <br />encasement material, restraining devices, and thrust blocks shall be included in the <br />cost of the pipe. <br />C. Fittings: Measurement of cast iron and ductile iron fittings shall be on the basis of <br />weight. The weights used to detcm7inc the quantity installed shall be the weights of <br />the appropriate fittings as listed in the supplier's invoice or catalog. When <br />mechanical joint fittings are required, the weight of the gland bolts and gaskets shall <br />not be added to the listed weight of tate fittings. Where flanged fittings are furnished, <br />the weight of the bolts and gaskets shall not be included. <br />D. Gate Valves and Tapping Valves: Mcasurcmcnt shall be on the basis of famishing <br />acid installing each type and size of valve (and tapping sleeve, if applicable) required, <br />including the valve boat, cover, and other associated items. <br />E. Fire Hydrant Assembly: Measurement of fire hydrant assembly shall be for the <br />actual number constructed in accordance with the Plans and Specifications, or as <br />directed by the Engineer, at the unit price bid for the item "Fire Hydrant Assembly," <br />scheduled in the Form of Proposal. The unit price for "Fire Hydrant Assembly" shall <br />include cutting bituminous paving, removal of paving courses and curb if required, <br />excavation, furnishing and installation of 10' (G") D.I.P. water main, dry -barrel <br />traffic hydrant, concrete foundations for hydrant, fitting, one (1) 6" diameter gate <br />valve, concrete thrust block (reaction backing) for fire hydrant, backfill, blue <br />reflective markers, all materials, equipment, labor and all else necessary therefore <br />and incidental thereto. <br />Water Service: Measurement of coater service lateral shall include ftimishing and <br />construction of piping and appurtenances to carry and distribute coater from the crater <br />main to the edge of the Right -of -Way for future service to individual property <br />owners. The work slta1l include, but shall not be limited to, cutting of existing <br />pavement cohere required, jack and bore of existing pavement where required, <br />excavation, installation (of pipe, metcr boxes, connections and associated <br />appurtenances), backfilling, testing, disinfection, and all restoration in kind. The <br />services shall be of type and size specified, and shall be constructed in accordance <br />with these Plans and Specification, or as directed by the Engineer. <br />G. HDPE Horizontal Directional Bore: Measurement of HDPE horizontal directional <br />bon shall include all material (including HDPE pipe), equipment, supplies, fuel, <br />labor, sheeting and bracing, jacking and boring pits (if required), excavation, <br />dewatering, backfilling, compaction, mechanical fittings, restoration, furnishing and <br />installing I-IDPE pipe. Wedge type split stainless steel inserts shall be used for <br />mechanical fittings on d" and 6" diameter pipe. A fitse welded mechanical joint <br />adapter kit shall be used for mechimical fittings on 12" diatncter pipe. Payments <br />shall be based on die lengths specified in the Schedule of Did Items. Directional boy: <br />lengths specified in the Schedule of Bid Items are cstim:,ted quantities. Contractor <br />will not be compensated for additional directional bore lengths. Additional pipe <br />lengths will be compensated based on the lineal foot estimate of PVC pipe. <br />H. Concrete Sidewalk and Driveway Replacement: Measurement of concrete for <br />sidewalk and driveway replacement shall be computed using the linear feet, as <br />measured along the pipe, or sidewalk and/or driveway rumovcd and replaced as a <br />01025-? <br />