2001-026 - Laserfiche WebLink

Home Browse Search

d do C D �® To minimize damage and traffic congestion, trucks shall limit their north -south route to I-95, USI and US AIA whenever possible. The final truck route shall be approved by the Engineer at the pre -construction meeting. 16. Material Placement General: The Contractor shall transport and deposit the sand fill material in the areas shown ' on the plans. The Contractor shall place the materials within the section and limits as shown on the drawings. The Contractor shall construct and stabilize, as deemed necessary, an access road for use by the dump trucks transporting material from the pit location to the construction site by the Contractor. The final route for the access road will be decided by the Contractor and Engineer. Every effort shall be made to limit clearing for the access road to areas of exotic vegetation. The Contractor shall avoid disturbing native vegetation wherever possible, and shall obtain permission from the Engineer before impacting any native vegetation. t Dump trucks transporting fill will enter the construction area using the access areas. Fill will ( be deposited on the beach at the access points, and the trucks will return along the access area L . - exiting where they entered the site. The Contractor shall use bulldozers or similar equipment to move the fill material from the access points into place on the beach. Compaction of the fill shall be avoided whenever possible. L: The material shall be placed in a high berm along the dune until all fill material has been transported to the site. During final dressing the fill shall be brought to rest on the beach to the grades and cross-section indicated on the plans unless otherwise provided for herein or + directed by the Engineer. The Contractor shall schedule its operations to take advantage of the tide so that placement is completed during optimum times or as directed. The Contractor shall not stockpile any equipment or debris on the beach except as approved by the Engineer. The beach is subject to changes and the elevations on the beach at the time the work is done t _ may vary from the elevations shown on the drawings. The Engineer reserves the right to vary the width or grade of the berm from the grades shown on the plans in order to establish an uniform beach for the entire length of the project. The beach fill cross sections shown on the drawings are for the purpose of estimating the amount of fill needed and will be used by the Engineer in making any change in the grades. The Contractor shall monitor the excavation f and fill operations and shall notify the Engineer if and when the quantity to be placed appears L to be excessive for the designated project site. j Prior to placement of fill, the Contractor shall remove all driftwood, plastics, and similar 1 debris from the fill material or lying within the foundation limits of the beach fill section. All materials removed shall be disposed of in areas provided by and at the expense of the Contractor and approvedby the Engineer. Grading and other construction equipment will not be permitted outside the work areas shown on the plans except for ingress and egress to and from the site. Grade Stakes: Wooden grade stakes will not be allowed. The material used for grade stakes shall be metal pipes that can be completely removed intact by the Contractor after placement of the fill. TP 5