Laserfiche WebLink
(2) Upon successfully completing the Major Seawater Ionic Imbalance Toxicity <br /> test, and following discussion of the results with the Department as provided in 9 . f. (6) , the <br /> Respondent may request a reduction in test frequency for the Americamysis (Mysidopsis) bahia <br /> bioassays from monthly to quarterly. All reductions in test frequency must be approved by the <br /> Department prior to implementation . <br /> d. Test Requirements : <br /> ( 1 ) All routine tests shall be conducted using a control (0% effluent) and a <br /> minimum of five dilutions : 100 % , 80 % , 40 % , 20 % , and 10 % effluent . <br /> (2) The permittee shall conduct 96-hour acute static renewal toxicity tests using <br /> the mysid, Americamysis (Mysidopsis) bahia , and the inland silverside, Menidia beryllina . <br /> (3 ) All test species , procedures and quality assurance criteria used shall be in <br /> accordance with Methods for Measurine Acute Toxicity of Effluents and Receivine Waters to <br /> Freshwater and Marine Organisms, EPA- 821 -R-02 -012 . Any deviation of the bioassay <br /> procedures outlined herein shall be submitted in writing to the Department for review and approval <br /> prior to use . In the event the above method is revised, the permittee shall conduct acute toxicity <br /> testing in accordance with the revised method. <br /> (4) The control water and dilution water used shall be artificial seawater and <br /> diluted to the test salinity as described in EPA-821 -R-02 -012 , Section 7 . 2 . 4 . The test salinity shall <br /> be determined as follows : <br /> (a) When the salinity of the effluent is between 1 and 7 parts per thousand (ppt) , <br /> the following salinity adjustment shall be used. For the Americamysis bahia bioassays , the effluent <br /> and the control (0% effluent) shall be adjusted to a salinity of 7 ppt for the 100% effluent test using <br /> artificial sea salts . No salinity adjustment shall be done for the Menidia beryllina bioassay test. <br /> The salinity of the control/dilution water (0% effluent) shall match the test salinity of the effluent. A <br /> 6 of 17 OGC File No . 08 - 1661 <br />