2008-249 - Laserfiche WebLink

Home Browse Search

Mr. Himanshu Mehta 11 July 2008 Page 7 Geosyntec will prepare and submit a set of construction drawings for the closure system specified in the Closure Permit Application as part of the vertical expansion construction drawings. The construction drawings will be extracted from the permit drawings and will include sufficient details for construction of the closure system, storm water features, and other related construction activities associated with the closure of the Class I disposal area within Segment 2 and Infill. The construction drawings will include control points along the toes of slopes, and other critical locations, including 50 -ft grid intervals, to facilitate construction and certification of the Project. Technical Specifications and the CQA Plan will be compiled as part of the Construction Documents. The specifications will be prepared using the industry -standard Construction Specification Institute (CSI) format. Task 6.2: Construction Cost Estimate Geosyntec will also prepare an Engineer's Estimate of Probable Construction Cost and a construction schedule to serve as a basis for comparison of bids during the procurement process. Probable construction cost will be based on estimated construction quantities for the project and engineering estimate of the probable unit cost for each item. Probable construction costs will be based on such catalogues as R.S. Means, information provided by product manufacturers, and Geosyntec's professional judgment and experience with similar closure system and installation projects. Additionally, Geosyntec will prepare a construction schedule based on Geosyntec's understanding of the Project and experience with similar closure system installation projects. Phase 7: Construction Support Services Geosyntec proposes to perform the construction -related services and provide engineering support associated with construction of the Project under three tasks. These include: (i) Field CQA Services; (ii) Construction Management; and (iii) Resident Engineering, Task 7.1: Field CQA Services Under this task, Geosyntec will provide CQA services during construction of the Project. Quality assurance monitoring, testing methods, test frequencies, and the reporting requirements will be performed in accordance with the CQA Plan, ASTM Standards, and applicable portions of Chapter 62-701, FAC. The work will be executed by an experienced project team consisting of office managerial staff and on-site CQA representatives. XR09I68/JL80I86.doc t:^n� ineurs I scientists I innovators