2007-060 - Laserfiche WebLink

Home Browse Search

B . The CONTRACTOR remains responsible for details and accuracy, for coordinating the work with all other associated work and trades, for selecting fabrication processes, for techniques of assembly, and for performing work in a safe manner. C . If the shop drawings, data or samples as submitted describe variations and show a departure from the Contract requirements which ENGINEER finds to be in the interest of the OWNER and to be so minor as not to involve a change in Contract Price or time for performance, the ENGINEER may return the reviewed drawings without noting an exception. D. Submittals will be returned to the CONTRACTOR under one of the following codes. Code 1 -"APPROVED" is assigned when there are no notations or comments on the submittal. When returned under this code the CONTRACTOR may release the _ equipment and/or material for manufacture. Code 2 -"APPROVED AS NOTED" is assigned when notations or comments have been made on the submittal pointing out minor discrepancies as compared with the Contract Documents . Resubmittal or confirmation is not necessary prior to release for manufacturing. Code 3 -"APPROVED AS NOTED/CONFIRM" . This combination of codes is assigned when a confirmation of the notations and comments is required by the CONTRACTOR. The CONTRACTOR may release the equipment or material .. for manufacture; however, all notations and comments must be incorporated into the final product. This confirmation is to address the omissions and/or nonconforming items that were noted. Only the items to be "confirmed" need to be resubmitted. Code 4 -"APPROVED AS NOTED/RESUBMIT " . This combination of codes is assigned when notations and comments are extensive enough to require a resubmittal of the package. The Contractor may release the equipment or material for manufacture; however, all notations and comments must be incorporated into ,. the final product. This resubmittal is to address all comments, omissions and non- conforming items that were noted. Resubmittal is to be received by the ENGINEER within 20 calendar days of the date of the ENGIlVEER's transmittal .. requiring the resubmittal. Code 5 -"NOT APPROVED" is assigned when the submittal does not meet the intent of the Contract Documents. The CONTRACTOR must resubmit the entire package revised to bring the submittal into conformance. It may be necessary to resubmit using a different manufacturer/vendor to meet the Contract Documents. Code 6 -"COMMENTS ATTACHED" is assigned where there are comments attached to the returned submittal, which provide additional data to aid the CONTRACTOR. Code 7 —"FOR YOUR INFORMATION" is assigned when the package provides information of a general nature that may or may not require a response. Codes 1 through 5 designate the status of the reviewed submittal with Code 6 showing there has been an attachment of additional data. Code 7 is used as may be necessary. Page 19 of 40