Laserfiche WebLink
1 . Deliver products in undamaged condition, in manufacturer's original containers or <br /> packaging, with identifying labels intact and legible. <br /> 2 . Immediately on delivery, inspect shipments to assure compliance with <br /> requirements of Contract Documents and approved submittals, and that products <br /> are properly protected and undamaged . <br /> B . Provide equipment and personnel to handle products by methods to prevent soiling or <br /> damage to products or packaging . <br /> 1 .06 STORAGE AND PROTECTION <br /> A. Furnish a covered, weather-protected storage structure providing a clean, dry, non- <br /> corrosive environment for all mechanical equipment, valves , architectural items , electrical <br /> and instrumentation equipment and special equipment to be incorporated into this project. <br /> Storage of equipment shall be in strict accordance with the " instructions for storage" of <br /> each equipment supplier and manufacturer including connection of heaters, placing of <br /> storage lubricants in equipment, etc . Furnish a copy of the manufacturer's instructions for <br /> storage to the Engineer prior to storage of all equipment and materials. Corroded, <br /> damaged or deteriorated equipment and parts shall be replaced before acceptance of the <br /> project. Equipment and materials not properly stored will not be included in a payment <br /> estimate. <br /> B . Store products in accordance with manufacturer's instructions, with seals and labels intact <br /> and legible. <br /> 1 . Store products subject to damage by the elements in weathertight enclosures. <br /> 2 . Maintain temperature and humidity within the ranges required by manufacturer's <br /> I <br /> instructions . <br /> 3 . Store fabricated products above the ground, on blocking or skids, prevent soiling <br /> or staining. Cover products which are subject to deterioration with impervious <br /> i <br /> sheet coverings, provide adequate ventilation to avoid condensation. <br /> 4 . Store loose granular materials in awell-drained area on solid surfaces to prevent <br /> mixing with foreign matter . <br /> IC, All materials and equipment to be incorporated in the work shall be handled and stored <br /> before, during and after shipment in a manner to prevent warping, twisting, bending, <br /> breaking, chipping, rusting and any injury, theft or damage of any kind whatsoever to the <br /> material or equipment. <br /> I D . Cement, sand and lime shall be stored under a roof and off the ground and shall be kept <br /> completely dry at all times. All structural and miscellaneous steel and reinforcing steel <br /> shall be stored off the ground or otherwise to prevent accumulations of dirt or grease and <br /> in a position to prevent accumulations of standing water and to minimize rusting. Beams <br /> shall be stored with the webs vertical. Precast concrete beams shall be handled and stored <br /> in a manner to prevent accumulations of dirt, standing water, staining, chipping or <br /> cracking. Brick, block and similar masonry products shall be handled and stored in a <br /> manner to reduce breakage, chipping, cracking and spalling to a minimum. <br /> 044572017 <br /> i <br /> 01610-3 <br />