Laserfiche WebLink
C. Furnish five (5) identical sets of operation and maintenance manuals when the VFD is delivered <br />for the VFD. Each set shall consist of one (1) or more volumes, each of which shall be bound in <br />a standard size, 3 -ring, loose-leaf, vinyl plastic hard cover binder, with pockets, suitable for <br />bookshelf storage. Binder ring size shall not exceed 2.5 inches. <br />1. O&M manuals shall include operating and maintenance instructions as applicable, for each <br />type of VFD as follows: <br />a. Complete operating instructions, including location of controls, special tools, or other <br />equipment required, related instrumentation, and other equipment needed for <br />operation. <br />b. Preventative maintenance procedures and schedules. <br />C. Bill of Materials and parts lists, by generic title and identification number, complete <br />with exploded views of each assembly. <br />d. Disassembly and reassembly instructions. <br />e. Recommended troubleshooting and start-up procedures. <br />f. Name and location of nearest supplier/service representative and spare parts <br />warehouse. <br />1.03 TOOLS, SUPPLIES AND SPARE PARTS <br />A. Parts shall be completely identified with a numerical system to facilitate parts inventory, control <br />and stocking. Each part shall be properly identified by a separate number, and those parts which <br />are identical for more than one size unit shall have the same number. The following shall be <br />supplied for each size of drive: <br />L One (1) set of all special tools, wrenches and non-standard test equipment required to <br />disassemble, test, repair and adjust the equipment shall be provided. <br />2. One (1) complete set of Manufacturer recommended spare parts. Spare parts shall include, <br />as a minimum, all replaceable circuit boards, fuses, power semiconductors, power <br />transistors, indicator lamps and appurtenances. <br />Additional items shall be supplied as <br />described elsewhere in the Specifications, <br />recommended by the equipment Manufacturer or as <br />A. All equipment furnished under this Section shall be guaranteed by the Manufacturer against <br />defects of workmanship and materials for a period of two (2) years from date of substantial <br />completion of the project. All such equipment or defective parts shall be replaced by the <br />Manufacturer at no cost to the Owner. <br />044572017 <br />16483-2 <br />